 Torsion Bar removal, is there a secret?? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ldino21 |
 Mar 20 2004, 11:51 AM
Post
#1
|
|
Member  Group: Members Posts: 62 Joined: 18-February 03 From: Fresno, CA Member No.: 316  |
I am trying to remove my A-Arms from my front suspension, but can't seem to get the torsion bar to pull out from the inside, is there a secret I don't know about??
Everything else is loosened up!! |
   |
 
|
  |
Replies
| r_towle |
Mar 20 2004, 05:31 PM
Post
#2
|
|
Custom Member Group: Members Posts: 24,588 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
|
I had a set of old rusty ones in my car originally.
I took off the front cover and valance.. Took a hammer and a punch and pounded it out. Had to hit it pretty hard. There is a little soft metal cover that you need to either pry loose, or try to save it before it gets destroyed, but it will eventually come out. Good luck Rich |
|
|
|
Posts in this topic
ldino21 Torsion Bar removal Mar 20 2004, 11:51 AM
thesey914 You have to remove the A arm first in order to gai... Mar 20 2004, 02:27 PM ldino21 Here is where I stand, I am in the process of remo... Mar 20 2004, 07:33 PM Jeroen First remove the adjuster bolt at the rear of the ... Mar 20 2004, 08:05 PM ldino21 I did all the things you said on the drivers side ... Mar 20 2004, 09:37 PM Eric_Shea It sounds like you're attempting this with the... Mar 20 2004, 10:13 PM
Eric_Shea After re-reading... if you have a blunt tool to us... Mar 20 2004, 10:21 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 02:50 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.