![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
tscrihfield |
![]()
Post
#1
|
Drive Fast and Take Chances ![]() ![]() ![]() Group: Members Posts: 643 Joined: 8-September 10 From: Amelia Ohio Member No.: 12,156 Region Association: None ![]() ![]() |
So .... here is the story. While in high school I received a job offer by a really nice guy to work in a Restoration/Body shop "Bennetts Rod Shop" in West Alexandria Ohio. I took it of course because I was an automotive student at a vocational school and could leave half a day early to go to work! So anyway while i was there I helped build a 1970 914-6 into a GT clone.
(IMG:http://www.914world.com/bbs2/uploads_offsite/i163.photobucket.com-12156-1286323973.1.jpg) So this car inspired me GREATLY! I had to have one of my own... While working there I also got the opportunity to restore a 356 and do work on an old Nash, Also worked on a 70 VW Bus Limo! That was cool. My main job was fabrication, so I learned a ton while I was there! In the Spring of 2008 I was getting married so I thought what better present to myself than to buy a 914 to restore. I had just bought a Garage (Just so happened to have a house on the same property...) so I finally had room to work. I bought a 74 sight unseen was told it had 38,000 Org miles and I thought... Well this couldn't go wrong... Little did I know it was a basket case. (IMG:http://www.914world.com/bbs2/uploads_offsite/i163.photobucket.com-12156-1286323974.2.jpg) Despite the look from this angle... It was a hunk of junk! Seriously it had rusted the rear suspension out! So this summer after working on the old bodies engine (building a 2.0 based engine) for the past year or so I decided this body just aint gonna do it. So.... (IMG:http://www.914world.com/bbs2/uploads_offsite/i163.photobucket.com-12156-1286323975.3.jpg) Yup I cut it in half! Tried to salvage what I could from it (which wasn't much) and move on. Then last month I found a nice donor for my new car... I knew that I wanted flares and have every intention on basing it on the car I had once completed. So My parents, Wife and I took a small vacation in Niagra Falls New York and just so happened to be that a 74 914 was for sale near there! (IMG:style_emoticons/default/happy11.gif) Here it is loading on the trailer... (IMG:http://www.914world.com/bbs2/uploads_offsite/i163.photobucket.com-12156-1286323976.4.jpg) And My first picture with it... Not many have one of those!!! (Reference to my Shoulder) (IMG:http://www.914world.com/bbs2/uploads_offsite/i163.photobucket.com-12156-1286323977.5.jpg) My Awesome Folks always have encouraged even my most wreckless Ideas... Now they are even helping load the car! (IMG:http://www.914world.com/bbs2/uploads_offsite/i163.photobucket.com-12156-1286323979.6.jpg) The rig that brought here home! (IMG:http://www.914world.com/bbs2/uploads_offsite/i163.photobucket.com-12156-1286323980.7.jpg) Nestled into its new home! (IMG:http://www.914world.com/bbs2/uploads_offsite/i163.photobucket.com-12156-1286323981.8.jpg) So now the Saga begins... |
![]() ![]() |
rick 918-S |
![]()
Post
#2
|
Hey nice rack! -Celette ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 20,950 Joined: 30-December 02 From: Now in Superior WI Member No.: 43 Region Association: Northstar Region ![]() ![]() ![]() |
Nice start (IMG:style_emoticons/default/welcome.png) (IMG:style_emoticons/default/assimilate.gif)
|
tscrihfield |
![]()
Post
#3
|
Drive Fast and Take Chances ![]() ![]() ![]() Group: Members Posts: 643 Joined: 8-September 10 From: Amelia Ohio Member No.: 12,156 Region Association: None ![]() ![]() |
Thanx for the welcome! Got hit by a PO crap Drunk driver on Saturday and it has stopped me from working on the car... Me and my wife were headed to church and a DD (Not designated) ran into the back of us. My back is out of commision so I am pokin around on the internet for new ideas.... Anyone have any? Update*... In better news I just ordered the type IV rebuild DVD from Raby and cant wait to start the rebuild. You may know from above since I have had the first car for comming up on 3 years I have had some time to collect parts and because my background is engines I decided to start there about 2 years ago. I bought a big bore kit, Web cam, H beam rods, gaskets, Lifters, cam gear....ect. Basically the only stock component is the crank, block and heads. So I will start with the back dated update of the engine. Just thought I would include what I can for the time being. I will include pictures as soon as I can move around a bit better. "Til then keep your stick on the ice. and if women can't find you hansome they should at least find you handy." -Red Green- |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 10th May 2025 - 01:09 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |