 DIY Strings Alignment Setup |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| yeahmag |
 May 12 2011, 11:14 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,448 Joined: 18-April 05 From: Pasadena, CA Member No.: 3,946 Region Association: Southern California 
 |
This was built using 80/20 hardware and a friend of mine on the mill:
 |
   |
 
|
  |
Replies
| yeahmag |
May 15 2011, 10:51 AM
Post
#2
|
|
Advanced Member Group: Members Posts: 2,448 Joined: 18-April 05 From: Pasadena, CA Member No.: 3,946 Region Association: Southern California
|
That's where the indexed bars come in to play. Set them so they are *exactly* the same width and at worst you are starting with a parallelogram.
I did the alignment yesterday and started with a steering wheel that was ever-so-slightly off... Ended that way too. Damn. Glad I did it though. 3 off the 4 wheels needed work (I had redone my rear bushings). I also verified my ride height was at least close to where I wanted it on all 4 corners. I'm sure I'll get better as this was my first time. I need to find a more level spot too! |
|
|
|
Posts in this topic
yeahmag DIY Strings Alignment Setup May 12 2011, 11:14 AM
yeahmag The sliders at the end are indexed every 5 mm
May 12 2011, 11:14 AM yeahmag I'm using string here just because it was hand... May 12 2011, 11:15 AM yeahmag The bars are *exactly* the same length and indexed... May 12 2011, 11:17 AM
Krank
The bars are *exactly* the same length and indexe... May 12 2011, 11:27 PM SirAndy Wheel track must be 100% the same between front an... May 13 2011, 12:05 AM Richard Casto
Wheel track must be 100% the same between front a... May 13 2011, 07:08 AM PeeGreen 914 :beer2: Nice, This is very similar to what you wou... May 12 2011, 11:33 AM yeahmag I know! That part is still killing me... May 12 2011, 11:38 AM URY914 Leave them on and use them for curb feelers. :D May 12 2011, 12:10 PM Andyrew String alignment works great for toe in/out, but I... May 12 2011, 03:08 PM SirAndy I use 2 4x4's and a tape measure and a buddy..... May 12 2011, 10:55 PM Andyrew
I use 2 4x4's and a tape measure and a buddy.... May 13 2011, 12:58 AM Dave_Darling I just dont see how a string method will do the c... May 13 2011, 10:42 PM mrbubblehead
I just dont see how a string method will do the ... May 14 2011, 07:54 AM SirAndy As long as you get the strings referenced to the a... May 14 2011, 01:24 PM mrbubblehead
[quote name='mrbubblehead' post='1477507' date='M... May 14 2011, 08:34 PM SirAndy so the front track width is the same as the rear t... May 14 2011, 08:39 PM mrbubblehead
so the front track width is the same as the rear ... May 14 2011, 08:46 PM fasthonda
so the front track width is the same as the rear ... May 15 2011, 07:14 AM SirAndy You need to take the track width into consideratio... May 15 2011, 12:55 PM wobbletop
You need to take the track width into considerati... May 16 2011, 10:26 PM Bartlett 914
You need to take the track width into considerat... May 17 2011, 06:02 AM whatabout1 For camber just get on flat floor (doesn't nee... May 12 2011, 03:35 PM Eric_Shea
How much to do a second one? May 12 2011, 10:34 PM yeahmag I would guess at least $200 in parts - probab... May 13 2011, 12:05 AM yeahmag This system does replace jack stands - and yes tha... May 13 2011, 12:03 AM 914 shifter
This system does replace jack stands - and yes th... May 15 2011, 06:11 AM BK911 I use a setup very similar, but with electrical co... May 14 2011, 09:18 AM sww914 I've done hundreds of alignments with computer... May 14 2011, 10:56 AM zonedoubt ...and the distance between string attachment poin... May 14 2011, 02:40 PM sixnotfour ray scruggs wrote this booklet a million years ago... May 14 2011, 04:35 PM John Do what you will, but I will stick with my machine... May 14 2011, 08:41 PM sww914 No, it might be 6 1/2" in the front to the st... May 14 2011, 09:15 PM mrbubblehead
No, it might be 6 1/2" in the front to the s... May 14 2011, 09:41 PM SirAndy No, it might be 6 1/2" in the front to the st... May 15 2011, 12:33 AM sww914 Not if you measure the distance between the string... May 15 2011, 09:14 AM SirAndy I did the alignment yesterday and started with a s... May 15 2011, 12:58 PM mrbubblehead
I did the alignment yesterday and started with a ... May 15 2011, 03:14 PM SirAndy couldnt you just pop the steering wheel off and th... May 15 2011, 07:44 PM tradisrad how to string align from smart racing.
I am a lit... May 17 2011, 09:19 AM SirAndy Is he correct with his terminology?
Yes, he is cor... May 17 2011, 12:05 PM tradisrad
Is he correct with his terminology?
Yes, he is co... May 17 2011, 01:14 PM enderw88
how to string align from smart racing.
I am a li... May 17 2011, 03:23 PM yeahmag And here are some videos from yesterday's trip... May 17 2011, 10:22 AM yeahmag Remember it's the distance from the *outside* ... May 17 2011, 12:09 PM Rand
Remember it's the distance from the *outside*... May 17 2011, 01:39 PM karnak Good info here. i have done a string alignment and... Jun 15 2011, 08:37 PM yeahmag 1/16" to in in the rear. 1/8" or more to... Jun 15 2011, 08:43 PM mrbubblehead this is the website i used to string align my car ... Jun 15 2011, 08:44 PM dion9146
this is the website i used to string align my car... Jul 22 2011, 02:12 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 10:20 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.