 Yet another car won't start thread. FIXED!, No click, no starter spin, nothing |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Jakeodoule |
 May 19 2011, 06:49 PM
Post
#1
|
|
Member  Group: Members Posts: 353 Joined: 10-October 08 From: Des Moines Iowa Member No.: 9,630 Region Association: Pacific Northwest  |
76 2.0 stock FI
Lucky for me its in my garage. Last time I drove it, it was all smiles! When I turn the key the FI charges and all lights seem normal. I get no click from the starter and no spin. Starter is less than 3000 miles old and was working fine. If I jump the terminals on the starter it spins. I have a solid AGM battery, 13 volts to starter on big power line. All fuses are good and wiring harness is totally stock and unmolested. I get no power to the brown wire on the starter soleniod when the key is turned. Is there a relay for this? (IMG:style_emoticons/default/WTF.gif) BTW I did do a search but most info is related to cranking but not starting. Any ideas? |
   |
 
|
  |
Replies
| Jakeodoule |
May 19 2011, 09:08 PM
Post
#2
|
|
Member Group: Members Posts: 353 Joined: 10-October 08 From: Des Moines Iowa Member No.: 9,630 Region Association: Pacific Northwest |
Changed the relay board and ignition switch. No Luck....
If I jump from the starter solenoid to power it starts and runs fine. Checked the back of the fuse panel and nothing stands out as a problem. I think the ignition wiring skips the fuse panel anyway and goes straight to the relay board. Anyone know what pin that comes in on the relay board? As well as what pin it goes out to starter solenoid? Would like to test voltage in and out of relay board. maybe I have a broken wire. The Sun has come out for the first time in 6 freak'n months and I can't drive my car! I have no idea WTF is causing this. (IMG:style_emoticons/default/blink.gif) (IMG:style_emoticons/default/headbang.gif) |
|
|
|
Posts in this topic
Jakeodoule Yet another car won't start thread. FIXED! May 19 2011, 06:49 PM
Jakeodoule Changed the switch. Its not that.
Its also not the... May 19 2011, 09:55 PM Kirmizi Just for giggles have you checked the relay (seatb... May 19 2011, 10:31 PM Cap'n Krusty There is no relay under the seat on a '76.
Th... May 19 2011, 10:35 PM Kirmizi Doh! Thanks Cap'n. Learn something everyda... May 19 2011, 10:38 PM Jakeodoule Yep there is a relay under the pass seat.
or was. ... May 19 2011, 10:47 PM mrgjones Wait, the starter solenoid IS the relay for the st... May 19 2011, 11:32 PM Jakeodoule Yep I have a multimeter. I am a field Engineer in ... May 20 2011, 07:53 AM aircooledtechguy There is a Bosch starter relay kit P/N WR1 that fi... May 20 2011, 08:49 AM Jakeodoule That is interesting Nate. Thanks!
The Dash lig... May 20 2011, 08:57 AM Tom Jake,
First off, there should be a yellow wir... May 20 2011, 09:21 AM
Jakeodoule
Jake,
First off, there should be a yellow wi... May 20 2011, 09:41 AM tradisrad yellow wire to the relay board is from the ignitio... May 20 2011, 10:16 AM Jakeodoule
yellow wire to the relay board is from the igniti... May 20 2011, 10:23 AM Jakeodoule Thanks to all for the assistance and to you Tradis... May 20 2011, 02:39 PM Vacca Rabite
So I cut it open and soldered it back up and I am... May 20 2011, 10:01 PM Jakeodoule There is differing opinions on that subject to be ... May 20 2011, 10:40 PM messix soldering at a fixed terminus is where there would... May 20 2011, 10:54 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th July 2025 - 11:55 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.