 Rpm doesn't drop to idle very fast |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Ian Stott |
 Oct 6 2011, 05:09 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 907 Joined: 28-January 08 From: Moncton/Canada Member No.: 8,635 Region Association: Canada  |
As the title says (the idle is around 950/1000) but it doesn't drop down to that very fast, it is almost like driving a vehicle with a sticky throttle. I have just installed a new (rebuilt by Jeff Bowlsby) relay board and cleaned up my grounds and cleaned the engine compartment. Any ideas what is going on?
Ian Stott Moncton Canada |
   |
 
|
  |
Replies
| Dave_Darling |
Oct 7 2011, 12:27 AM
Post
#2
|
|
914 Idiot Group: Members Posts: 15,161 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California 
|
Some things that come to mind as possible causes:
Decel Valve sticking, hooked up wrong, or mis-adjusted. Vacuum leak. Advance in the distributor is sticking. Vacuum advance/retard hooked up incorrectly. --DD |
|
|
|
Posts in this topic
Ian Stott Rpm doesn't drop to idle very fast Oct 6 2011, 05:09 PM
luskesq Knowing what year, what engine and whether it is F... Oct 6 2011, 05:16 PM Ian Stott Ooops, 73 2.0 all original D Jet.
Ian Stott
Monct... Oct 6 2011, 06:28 PM rnellums I had the same issue with mine when I rescued it f... Oct 6 2011, 07:56 PM Prospectfarms
As the title says (the idle is around 950/1000) b... Oct 7 2011, 12:17 AM
r_towle
Some things that come to mind as possible causes:... Oct 7 2011, 08:12 AM BK911 I have this problem in a 356. If I keep the car i... Oct 7 2011, 09:13 AM r_towle The problem occurs when the old grease (40 year ol... Oct 7 2011, 10:53 AM Ian Stott Well! Feeling pretty dumb on this one, new flo... Oct 10 2011, 11:31 AM ChrisNPDrider OMG :beer2:
Wasn't that the problem that cost... Oct 10 2011, 01:37 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 02:34 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.