![]() |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
![]() |
siverson |
![]()
Post
#1
|
Advanced Member ![]() ![]() ![]() ![]() Group: Benefactors Posts: 2,448 Joined: 5-May 03 From: San Diego, CA Member No.: 654 Region Association: Southern California ![]() ![]() ![]() |
Has anyone ever tried *removing* the Brad Meyeur longitudinal kit? Did it work without creating even more problems?
-Steve |
![]() ![]() |
Engman |
![]()
Post
#2
|
Zoisite ![]() ![]() ![]() Group: Benefactors Posts: 1,349 Joined: 25-March 03 From: New Albany, IN Member No.: 475 ![]() ![]() |
When you weld the kit in, enlarge the holes to 1/2 or 5/8. It makes for a longer stronger weld instead of a dot. Actually, there is a correct size for the hole. My earlier kits were on the small side of this. I went to several shows and different people to research the right size of hole. Too large a hole creates a heat affected zone that can cause stress cracking of the underlaying material. The holes in the current version 5 of my kit were made larger as per the shops and builders I talked with. A 1/2" hole is OK but it does mean that you are putting more heat into the long and have to take more time to weld it as you have to move the heat around, and sometime let things cool, to avoid warping the long. Mark |
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 15th June 2024 - 08:51 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |