Head temp differences, How big is too big? Options

[lapuwali]

I recently fit a CHT gauge, and originally put the sender under the #4 plug. Readings were in line with what I've read here: idled at 300dF, cruised at 325-350dF, touched 400dF under heavy load (lots of long uphill grades here).

I moved the sender to the #1 plug yesterday, and the temps are as much as 50dF lower across the board. Idles at 250dF, cruise about 300dF, never exceeds 350dF even pulling up a long hill.

I expected a difference, but not 50dF (20%!) between heads. I'm running Webers, so it's possible I have completely different mixtures for each cylinder. I presume cooler head temps would usually mean richer? This would be in line with plug colors (blacker on the 1/2 head, tanner on the 3/4 head). Hmmm....

[dmenche914]

goodness sake jake (hey that rhymes) You are doing a great service to all us type I and IV Vw owners with you cooling work. I think we all will be owing you a big thanks for this work.

When do you expect the type I DTM to be ready, and what is the cost? Does it use stock fan and generator stand?

Will all these results be in the Ultra VW article?

dave