Car Covers What to buy, Need something to block the elements while I restore my car in a shade tree environment. |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Car Covers What to buy, Need something to block the elements while I restore my car in a shade tree environment. |
Steve73 |
Feb 15 2012, 08:41 PM
Post
#1
|
Photographer/Shade Tree Mechanic Group: Members Posts: 125 Joined: 2-July 11 From: Nashville Member No.: 13,269 Region Association: South East States |
Let me know what you all like. My car's exerior needs to be stripped so I'm not so worried about protecting the paint right now. I just want to keep out the weather so all the work on the floorboards won't be ruined by standing water coming through leaky seals in the body.
If you have an old one that looks bad but works contact me (IMG:style_emoticons/default/smile.gif) I figure those should be replaced almost last in the rebuild process. After the paint and before the interior goes in. Here is what Pelican Parts offers http://www.pelicanparts.com/catalog/coverk...ing_outdoor.htm |
charliew |
Feb 16 2012, 09:39 AM
Post
#2
|
Advanced Member Group: Members Posts: 2,363 Joined: 31-July 07 From: Crawford, TX. Member No.: 7,958 |
I would not even attempt this in a high humidity area. You will be wasting your time. It's seems like you really don't have the money to start a project like this right now. You will actually have less productivity because once the car comes apart everything will be open to the elements. All a tarp will do is keep leaves out and moisture in. It sounds like it going to be on dirt instead of concrete. I think you will end up just selling parts but you can learn from that so go for it. I restored a old jeep once and while the body was in the shop I put the complete chassis outside with a tarp on it. One spring day I took the canvas tarp off it and noticed the transfer case seals were leaking. I took the top off the tranny and it was full of water. I spent all day trying to get the rusty look out of the lube and running the motor and tranny and axles through the gears with 30 wt oil in it to get it cleaned up. It came out ok but the gears had obvious stains from rust on them. There were no leaks in the top of the tranny or the transfer case it was from condensation. I never buy anything like a rearend or tranny that has set out in the weather without the body on it. Old tractors are perfect candidates for this also. Cast iron probably will sweat more than the 914 tub but it will still get moisture inside the unibody cavities unless they are already so rusted through that they can breathe and drain.
|
Lo-Fi Version | Time is now: 1st June 2024 - 09:58 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |