 Voltmeter gauge drops under 11 volts, Readings decrease when loads are applied |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| championgt1 |
 Nov 15 2010, 02:43 PM
Post
#1
|
|
Don't embarrass me Filmore!  Group: Members Posts: 2,681 Joined: 3-January 07 From: Tacoma, Washington Member No.: 7,420 Region Association: Pacific Northwest  |
Installed a new battery and started the car. Voltmeter gauge reads around 13 volts. Cool. Turn the headlights on, gauge reads about 12. Cool. Hit the brake pedal gauge now drops below 11. Not cool.
The owners manual says the gauge should stay between 12 and 14 with loads applied. Mine is dropping below 11. Any ideas? Bad Ground? |
   |
 
|
  |
Replies
| cary |
Sep 5 2012, 08:01 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 3,900 Joined: 26-January 04 From: Sherwood Oregon Member No.: 1,608 Region Association: Pacific Northwest 
|
Finally got around rewiring the voltage gauge.
Relay in the console. Put an inline fuse on the 12 volts from the battery. Works like a champ. 12 volts at key on. Running at 13.5 volts while driving. (IMG:style_emoticons/default/cheer.gif) (IMG:style_emoticons/default/cheer.gif) (IMG:style_emoticons/default/cheer.gif) |
|
|
|
Posts in this topic
championgt1 Voltmeter gauge drops under 11 volts Nov 15 2010, 02:43 PM
r_towle check with a digital volt meter at the battery.
Se... Nov 15 2010, 02:46 PM dr914@autoatlanta.com totally normal (as stated in the Tech Tips 700) th... Nov 15 2010, 03:32 PM championgt1 Checked voltage at the battery with a meter. Gauge... Nov 15 2010, 05:57 PM Spoke Ohms law says it all: V = I x R
With current (I) ... Nov 15 2010, 08:57 PM cary Mine does the same thing. I was thinking I needed ... Nov 15 2010, 09:10 PM jim_hoyland I went through the same thing. Finally wired the b... Nov 15 2010, 09:10 PM
jk76.914
I went through the same thing. Finally wired the ... Nov 16 2010, 04:25 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 03:55 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.