 73 2.0L Idle problem |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| cwpeden |
 Dec 26 2012, 01:34 AM
Post
#1
|
|
Great White North, huh?  Group: Members Posts: 916 Joined: 20-August 06 From: Victoria BC Member No.: 6,693 Region Association: Canada  |
I'm trying to help a friend solve an idle problem. Idle is low to the point of stalling and backfiring.
Here's what we have tryied so far: Grounds are good Timing is good Dwell is a litlle high Vacuum hoses are good Cyl head temp sensor good Ballast resistor good Points good Cap good rotor good Been through two trobleshooting guides with no results. Need help figuring out a peculiar problem. When I take the vac lines off the dist I get the the usual high revs but they dont go away when the lines are plugged. Could this be a symptom of a bad vac can on the dist? Any thoughts |
   |
 
|
  |
Replies
| cwpeden |
Dec 29 2012, 06:41 PM
Post
#2
|
|
Great White North, huh? Group: Members Posts: 916 Joined: 20-August 06 From: Victoria BC Member No.: 6,693 Region Association: Canada |
I'm feeling the same myself, about the condition of the dist. Think I'll just pull the good dist out of my car with the pertronix and see what happens.
|
|
|
|
Posts in this topic
cwpeden 73 2.0L Idle problem Dec 26 2012, 01:34 AM
914itis Was timing set with the vac lines plugged? Try to ... Dec 26 2012, 05:44 AM cwpeden Timing set with vac lines off the dist and plugged... Dec 27 2012, 03:24 AM Bleyseng MPS is correct number (037) and tests good with a ... Dec 27 2012, 10:48 AM cwpeden Does MPS affect idle mixture?
If it was bad I wou... Dec 27 2012, 03:55 PM euro911 There's not much vacuum being drawn above idle... Dec 27 2012, 04:34 PM
914_teener
There's not much vacuum being drawn above idl... Dec 27 2012, 04:57 PM euro911 Does MPS affect idle mixture?
If it was bad I wou... Dec 27 2012, 05:36 PM Cap'n Krusty
I'm trying to help a friend solve an idle pro... Dec 27 2012, 06:06 PM cwpeden
I'm trying to help a friend solve an idle pr... Dec 28 2012, 02:10 AM euro911 Valves adjusted correctly?
Dwell should be somewhe... Dec 27 2012, 06:17 PM euro911 Are you sure the two vacuum hoses to the dizzy are... Dec 28 2012, 10:17 AM 914_teener
Are you sure the two vacuum hoses to the dizzy ar... Dec 28 2012, 01:03 PM cwpeden Finally had the chance to go to my friends place t... Jan 11 2013, 01:29 AM euro911 If you don't already have a 'MightyVac... Jan 11 2013, 01:44 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 29th April 2026 - 07:04 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.