 jetting question |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| last337 |
 Apr 28 2013, 07:17 PM
Post
#1
|
|
Member  Group: Members Posts: 421 Joined: 4-December 12 From: New Orleans Member No.: 15,221 Region Association: None  |
Okay so I had another thread troubleshooting these carbs but I've found the jetting to be the culprit. I am looking at Bob Tomlinson's suggestions and he is suggesting bw a 1.45 and 1.55 for the main jet. I currently have only a 1.15. I have a 52 for the idle and he recommends a 55. What do you guys think? I am running a stock 2.0.
Also, any suggestions on a vendor for jets? |
   |
 
|
  |
Replies
| yeahmag |
May 1 2013, 05:58 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 2,455 Joined: 18-April 05 From: Pasadena, CA Member No.: 3,946 Region Association: Southern California 
|
I think you really need an LC-1 or LM-2. The LC-1 is very affordable and with ethanol/gas percentages changing this may be a moving target for all of us.
|
|
|
|
| 0396 |
May 1 2013, 08:05 PM
Post
#3
|
|
Advanced Member Group: Members Posts: 2,046 Joined: 13-October 03 From: L.A. Calif Member No.: 1,245 Region Association: Southern California |
QUOTE(yeahmag @ May 1 2013, 04:58 PM)  I think you really need an LC-1 or LM-2. The LC-1 is very affordable and with ethanol/gas percentages changing this may be a moving target for all of us. Nailed it.... I got mine from Richard Clewtte and it's saved me many many guess works. I went from 175 main down to 140 main AF ended up between 11:5 to 12:3 http://www.clewett.com |
|
|
|
Posts in this topic
last337 jetting question Apr 28 2013, 07:17 PM
ThePaintedMan
Okay so I had another thread troubleshooting thes... Apr 28 2013, 07:47 PM rhodyguy easier to keep track of what's happening and w... Apr 28 2013, 08:00 PM
last337
easier to keep track of what's happening and ... Apr 28 2013, 08:03 PM last337 So do you guys think a 150 is what I should go wit... Apr 29 2013, 02:29 PM michael7810 My 1911 has 135 mains and AF is 12.5 at WOT (IDF40... Apr 29 2013, 03:49 PM last337 I spoke to a guy at dirtyracingandrods and he seem... Apr 29 2013, 04:39 PM ThePaintedMan
I spoke to a guy at dirtyracingandrods and he see... Apr 29 2013, 05:04 PM last337 Well from what I understand the main circuit picks... Apr 30 2013, 07:14 AM rhodyguy what is the venturi size? :unsure: engine off, loo... Apr 30 2013, 08:01 AM last337 Currently this is everything I verified
115 main
5... Apr 30 2013, 08:12 AM rhodyguy thomlinsons base line guide for dual idf 1835-2000... Apr 30 2013, 08:33 AM last337 What does the main air correction jet do? Apr 30 2013, 09:25 AM rhodyguy p. 59. Apr 30 2013, 09:39 AM last337 So I talked to john at air cooled.net and he said ... May 1 2013, 05:45 PM ThePaintedMan
I think you really need an LC-1 or LM-2. The LC-1... May 1 2013, 08:29 PM jmill
So I talked to john at air cooled.net and he said... May 1 2013, 08:39 PM jmill
A change in air correction jets results in a rich... May 1 2013, 08:49 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd July 2025 - 01:46 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.