Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> What's it worth?, Trying to get an opinion on how much it's worth
13b914
post May 17 2013, 12:41 PM
Post #1


Member
**

Group: Members
Posts: 75
Joined: 2-August 07
From: Youngstown Florida
Member No.: 7,963
Region Association: None



I have a ravenna green 1973 914 (No Motor). The car had minimal rust in the rear trunk that has been repaired and a slight amount of rust on the passenger side rear floor pan. The car is as solid as it can be. I added the chasis re-enforcement and I also welded in beef up plates for the rear suspension ears. I have pictures of the underside of the car while it was on the rottisserie and while it was bare metal. The rockers are all original and have no rust. It has metal flares, immitation fuchs. I was going to go watercooled so it already has a radiator with all the shrouding and fan set-up. I modified the front bumper with the 350Z billet grill as many others have done. I also fabbed a gt style engine grill. I would include new aftermarket bumper tops and just about all the rubber seals. The car has a 5 lug set-up from a 911 in the front and drilled rear hubs(all Bilstein and delrin bushings with grease fittings). It also has a 23mm front sway bar. The rear stock sway bar will come with the car but it's not installed. Also included would be powder coated black side mirrors along with powder coated black door handles. the rear valance is steel and has been fitted to the flares, the front valance is fiberglass and still needs fitment. Rear trunk is fiberglass and fits decent. The rocker panels are fiberglass and still need a little work but they are a close fit. the seats are grey leather and look really good. Also comes with a pearlon carpet kit. I have just about all the parts to put the car back together. I'm trying to get a ballpark number of what I should try to sell at. I'm sure there is plenty i'm leaving out.

Attached ImageAttached ImageAttached Image
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
sixnotfour
post May 17 2013, 08:29 PM
Post #2


914 Wizard
**********

Group: Members
Posts: 11,266
Joined: 12-September 04
Member No.: 2,744
Region Association: NineFourteenerVille



Don't under price yourself as little rust 914's are rare back east esp with the add ons you have posted, just takes a bit of time for the right buyer...I disagree with the 2-3k number..
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
BIGKAT_83
post May 18 2013, 12:46 AM
Post #3


Senior Member
***

Group: Members
Posts: 1,800
Joined: 25-January 03
From: Way down south Bogart,GA
Member No.: 194
Region Association: South East States



QUOTE(sixnotfour @ May 17 2013, 10:29 PM) *

Don't under price yourself as little rust 914's are rare back east esp with the add ons you have posted, just takes a bit of time for the right buyer...I disagree with the 2-3k number..

(IMG:style_emoticons/default/agree.gif)
The car is worth way more than 2 to 3k. The flares and install would be more than that alone. I see people buying rust buckets and then spending thousands of dollars on repair.

Were you going to use a rotary with this or a Subaru?

Also is the car in Atlanta or FL.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 9th June 2026 - 04:06 AM
...