 Dizzy repair... Does this "cam" come off?, I don't want to break it! |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Bob L. |
 May 28 2013, 12:31 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 848 Joined: 7-August 11 From: Austin TX Member No.: 13,411 Region Association: Southwest Region  |
 I have tried to punch the pin out but it wont budge. It seems like it should come out. I need to replace the thrust washer that keeps the cam stable. Any help is appreciated. |
   |
 
|
  |
Replies
| luskesq |
May 28 2013, 09:03 PM
Post
#2
|
|
Member Group: Members Posts: 276 Joined: 24-October 10 From: Fresno, CA Member No.: 12,303 Region Association: Central California |
I had mine off some time ago. It is hardened steel, and I used a punch/decent sized hammer on it. I don't recall specifically but it may be somewhat directional. You might try smacking it from one side, if that doesn't work, tap from the other direction. Also remember to reinstall the same way it came off. I wouldn't try heat by the way.
Good luck, Keith |
|
|
|
Posts in this topic
Bob L. Dizzy repair... Does this "cam" come off? May 28 2013, 12:31 PM
ThePaintedMan
I have tried to punch the pin out but it wont b... May 28 2013, 12:41 PM Bob L. Thanks George,
I saw those. The description says... May 28 2013, 07:55 PM ThePaintedMan Keith is right. It's some crazy kind of steel ... May 28 2013, 09:07 PM dangrouche I used a drift and tapped a pin mark to make sure ... May 28 2013, 09:26 PM Kraftwerk Simple Hi-jack: What kind of distributer is in the... May 29 2013, 09:04 PM Dave_Darling Stock == DVDA, but often the advance wasn't ho... May 29 2013, 10:40 PM Cap'n Krusty
I have tried to punch the pin out but it wont b... May 29 2013, 11:28 PM dlestep I just went through this the other day.
By the way... May 30 2013, 08:14 AM
dangrouche here is a pic from a previous post of it disassemb... May 30 2013, 08:31 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 04:55 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.