P/C garage sale Options

[hedfurst]

Cleaning out my garage. Have a few sets plus some odd and ends.

*1.7L P/C set with domed pistons. Core motor from AA that I bought for the case, had been rebuilt but never run. I think one of the oil rings is broken but the rest is in in great shape! Again-rebuilt motor that never saw ignition, heads were pristine-already sold them. $200
*set 94mm dished(6cc) pistons $100
*At least one set of 94mm bus pistons, bigger dish $50
*single 94mm mahle flat top, I believe its a TIV No dish $25 (got it in trade)
*3 AA 96mm black cylinders $50ea
*2 Mahle 94mm cylinders still have factory honing/cross-hatch $75ea

All above prices are negotiable/OBO. All of the cylinders have all of their fins. I discarded the broken ones.

I also have a set of 94mm Mahle Euro flat tops that I have been using with stock cylinders. Can include cylinders if you want them. Rebuild of 18mos, rings are seated nicely. They are balanced.
Make offer

Fred

[hedfurst]

Bought a set of flat-top Mahles about 4 years or so ago. Fellow I bought them from had had them for a number of years on a shelf- they had come off of a test motor from aircooledtechnology. Had been dynoed and then disassembled, cylinders still have the factory crosshatch. Had some broken fins on one cylinder from shipping/movement. I re-honed my stock cylinders and have used them in my 912E without any problems. Now up-grading my top-end to 96s'.