 Removing Ball Joints, ball joint nut..where to get the tool? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jim912928 |
 Jul 9 2004, 08:27 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 1,487 Joined: 8-January 04 From: Granger, IN Member No.: 1,536 Region Association: Upper MidWest  |
I'm going to be replacing the ball joints on my control arms...the control arms are off the car. This looks like it takes some weird socket with 4 notches on it. Since there is no porsche dealership even close to me...where does one get this tool? And are there any tricks to the trade I should know about before I start cranking on it?
Thanks in advance. |
   |
 
|
  |
Replies
| rhodyguy |
Jul 9 2004, 08:35 AM
Post
#2
|
|
Chimp Sanctuary NW. Check it out. Group: Members Posts: 22,248 Joined: 2-March 03 From: Orion's Bell. The BELL! Member No.: 378 Region Association: Galt's Gulch |
if you have a compressor and a air chisel it will take about 5 seconds to loosen the nut. place the chisel end in one of the notches. be very careful when you remove and reinstall the the ball joint pin.
kevin |
|
|
|
Posts in this topic
jim912928 Removing Ball Joints Jul 9 2004, 08:27 AM
Bigbohr I bought that socket from Pelicanparts. Use with i... Jul 9 2004, 08:37 AM ArtechnikA prelubricate with some real penetrating oil (like ... Jul 9 2004, 08:57 AM Travis Neff I beat the hell out of mine with a drift and a 3lb... Jul 9 2004, 09:04 AM rhodyguy soak the pins well and let the penetrent work. ify... Jul 9 2004, 09:16 AM
KenH A large pipe wrench will remove & install them.
I... Jul 9 2004, 09:25 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 4th July 2025 - 04:26 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.