 Sealing cases |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Shindog1961 |
 Jun 13 2013, 11:47 PM
Post
#1
|
|
Member  Group: Members Posts: 196 Joined: 10-November 12 From: Santa Fe New Mexico Member No.: 15,133 Region Association: Southwest Region  |
What are you using to seal the case halves on a rebuild? Any thread lock for case bolts?
|
   |
 
|
  |
Replies
| stugray |
Jun 14 2013, 01:31 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 3,825 Joined: 17-September 09 From: Longmont, CO Member No.: 10,819 Region Association: None |
QUOTE Another key in obtaining a good, leak free seal, is to get the mating surfaces REALLY clean and to gently flat file the halves to rid them of any burrs or bumps that may have occurred during disassembly. Be careful Capn, or you just might bring out the types that think if you even TOUCH a case mating surface, that you should just throw it away and start over: http://www.914world.com/bbs2/index.php?sho...l=file&st=0 The pics posted are of a spot on the top of the case where a PO obviously tried to pound a chisel between the case halves to separate them. The pics in that thread are where I needed to take the high spots off of the chisel marks. I cleaned up with a sanding block before sealing the halves. (and the abuse was on the top of the case = minimum chance of leakage) Stu |
|
|
|
Posts in this topic
Shindog1961 Sealing cases Jun 13 2013, 11:47 PM
cwpeden I've used Permatex or Loctite "Aviation G... Jun 14 2013, 12:44 AM pcar916 Search the forums with the phrase (no parentheses)... Jun 14 2013, 05:33 AM Cap'n Krusty In the past I've used Permatex Hi-tack, Curil ... Jun 14 2013, 08:16 AM
Cap'n Krusty
Be careful Capn, or you just might bring out th... Jun 15 2013, 12:53 AM PanelBilly I was Also told not to clean up the excess that wa... Jun 14 2013, 04:55 PM Cap'n Krusty
I was Also told not to clean up the excess that w... Jun 15 2013, 12:47 AM Shindog1961 Thanks for the advice! Jun 15 2013, 12:14 AM pcar916 I also had metal shop in 8th - 12th grades... for ... Jun 15 2013, 09:34 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 15th March 2026 - 07:18 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.