Kadron Solex Duels, Has anyone tried this setup? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Kadron Solex Duels, Has anyone tried this setup? |
Nozzle |
Aug 26 2013, 05:36 PM
Post
#1
|
Member Group: Members Posts: 158 Joined: 6-November 08 From: Lexington Park, Maryland Member No.: 9,725 Region Association: MidAtlantic Region |
Just read a thread comparing the virtues of different carb setups and came across a link for a company selling duel single Kadron carb kits for the type 4 engines.
http://www.shop.kaddieshack.com/BRAND-NEW-...20L-43-4520.htm I'd never really heard anyone on this board talk much about the duel single-choke carbs as a viable option. It sounds like a nice compromise between the efficiency of a stock D-jet and power of duel twin-choke Webers or Dells. Has anyone used this setup for a 2.0 engine before and if so what cam did you use? Thanks, John |
ChrisFoley |
Aug 27 2013, 07:14 AM
Post
#2
|
I am Tangerine Racing Group: Members Posts: 7,934 Joined: 29-January 03 From: Bolton, CT Member No.: 209 Region Association: None |
There's an inherent problem with dual singles on a flat four engine.
The intake pulses aren't timed properly for good balance of the air/fuel charge. This becomes really apparent if any sort of performance camshaft is installed. The engine firing order, being 4,3, 2,1 means one carb does 2 intake pulses sequentially and then waits one full crank revolution for the other carb to do its 2 intake pulses. The result is that the forward cylinders (2 & 4) run at one mixture and the two rear cylinders (1 & 3) at a very different mixture. This is exacerbated by reversion from any cam overlap which will further screw up the second pulse on both carbs. Combined with the rather short intake runners typical of a dual carb installation, an engine with a performance cam and dual singles can not be tuned to run well. |
ThePaintedMan |
Aug 27 2013, 07:31 AM
Post
#3
|
Advanced Member Group: Members Posts: 3,886 Joined: 6-September 11 From: St. Petersburg, FL Member No.: 13,527 Region Association: South East States |
There's an inherent problem with dual singles on a flat four engine. The intake pulses aren't timed properly for good balance of the air/fuel charge. This becomes really apparent if any sort of performance camshaft is installed. The engine firing order, being 4,3, 2,1 means one carb does 2 intake pulses sequentially and then waits one full crank revolution for the other carb to do its 2 intake pulses. The result is that the forward cylinders (2 & 4) run at one mixture and the two rear cylinders (1 & 3) at a very different mixture. This is exacerbated by reversion from any cam overlap which will further screw up the second pulse on both carbs. Combined with the rather short intake runners typical of a dual carb installation, an engine with a performance cam and dual singles can not be tuned to run well. That makes a TON of sense. (IMG:style_emoticons/default/beerchug.gif) |
Lo-Fi Version | Time is now: 1st June 2024 - 12:09 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |