 Rear alignment questions |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| mike_the_man |
 Jul 28 2004, 09:19 AM
Post
#1
|
|
I like stuff!  Group: Members Posts: 1,338 Joined: 11-June 03 From: Regina, Saskatchewan, Canada Member No.: 809  |
Hi all,
I'm going to try and get a wheel alignment again this weekend. This time I'm planning on standing there and watching everything they do, just to make sure they do everything I ask. I have my doubts that they know how to align a 914, especially the rear. The front adjustments seem pretty straight forward to me. The rear, on the other hand, is a little less clear. There are 3 bolts to loosen, I believe. Does anybody have a decent pic of the bolts that are used in the adjustment? Also, loosening the bolts allows adjustment of the rear toe, but shims are needed to adjust the camber, is that correct? Anybody that can explain this to me will get a beer, although they have to come up to Regina, Saskatchewan to collect. (IMG:style_emoticons/default/beerchug.gif) (IMG:style_emoticons/default/biggrin.gif) Thanks, |
   |
 
|
Posts in this topic
ClayPerrine the three bolts on the outboard mounting bracket f... Jul 28 2004, 12:06 PM seanery Mike, do you have the correct shims?
If not, chec... Jul 28 2004, 12:14 PM mike_the_man Hmm, I don't have any shims. I was hoping tha... Jul 28 2004, 01:15 PM Engman Clay nailed the procedure - of course a nice align... Jul 28 2004, 01:46 PM KenH Make sure the Rear Toe-in is as close as possible ... Jul 28 2004, 03:20 PM mskala Especially if I was going to take it to somebody n... Jul 29 2004, 10:12 AM RustyWa So don't you have to visit an alignment shop F... Jul 29 2004, 10:22 AM Otmar I aligned mine myself, but the price of shims at t... Jul 29 2004, 10:51 AM
Phoenix-MN The factory manual states that each mm in shim thi... Jul 29 2004, 11:04 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 04:20 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.