 Hub-centric 5 lug |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| gms |
 Apr 13 2014, 08:04 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,721 Joined: 12-March 04 From: Chicagoland Member No.: 1,785 Region Association: Upper MidWest 
 |
mount up on lathe
 Stock version on left Attached image(s) 
|
   |
 
|
  |
Replies
| Eric_Shea |
Apr 13 2014, 10:47 AM
Post
#2
|
|
PMB Performance Group: Admin Posts: 19,304 Joined: 3-September 03 From: Salt Lake City, UT Member No.: 1,110 Region Association: Rocky Mountains  |
Took me a while. I was looking for the lathe marks and missed the obvious end of the shaft.
This has tremendous potential. Have you checked rotor offsets? 944? The 911 rotor will need to be spaced 10mm out and the 914-6 will need 5mm BUT... the 944 rotors may just be the ticket!! AND... it pulls the offset in another 1/4" plus. Right where we need it! (Eric exits stage left and scrambles for parts...) |
|
|
|
Posts in this topic
gms Hub-centric 5 lug Apr 13 2014, 08:04 AM
gms Stock version on left
Mmmm hub-centric!
Apr 13 2014, 08:05 AM
worn
Took me a while. I was looking for the lathe mar... Apr 14 2014, 11:45 AM Eric_Shea
Is the difference in shaft lengths the reason I h... Apr 14 2014, 09:47 PM SirAndy I like that!
I had a set of those 944s at som... Apr 13 2014, 10:58 AM Eric_Shea
Those are probably a different offset altogether... Apr 13 2014, 11:04 AM Travis Neff So 5mm off the backside of the wheel bearing side?... Apr 13 2014, 01:03 PM CptTripps This is timely. I think I'm fighting what this... Apr 13 2014, 02:25 PM jaxdream
This is timely. I think I'm fighting what thi... Apr 13 2014, 05:38 PM CptTripps
If you pull those hubs you might stand a chance o... Apr 14 2014, 09:25 AM mskala Took me a while to realize this is about modifying... Apr 14 2014, 09:47 AM SirAndy But what is the point of this?
The point is to ha... Apr 14 2014, 11:40 AM mskala
But what is the point of this?
The point is to h... Apr 14 2014, 12:58 PM SirAndy However, you already have the studs there, which w... Apr 14 2014, 01:03 PM mskala
However, you already have the studs there, which ... Apr 14 2014, 01:36 PM mskala lug nut
wheel bolt
Apr 14 2014, 01:42 PM r_towle
[quote name='SirAndy' post='2024616' date='Apr 14... Apr 14 2014, 02:30 PM SirAndy So what you're saying is ...
No, that's y... Apr 14 2014, 02:32 PM Luke M With the later 5 lug hubs you need to put a spacer... Apr 13 2014, 02:48 PM Travis Neff The worry I have with the spacer is that it pushes... Apr 13 2014, 03:04 PM Eric_Shea Doug, you need the hub shaft spacer that Luke sugg... Apr 13 2014, 05:06 PM Mike Bellis So what year 911 have these hubs that can be mille... Apr 14 2014, 04:14 PM bdstone914 911 started using the hub centric hubs in 74. Not ... Apr 14 2014, 05:57 PM jaxdream Maybe the OP will enlighten us as to the source of... Apr 14 2014, 05:47 PM Eric_Shea Remember, once you do this, the rotor offset will ... Apr 14 2014, 09:56 PM Travis Neff Bump.. Looking to hear what rotor and caliper you... Apr 18 2014, 11:30 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 8th July 2025 - 05:37 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.