 Ventilating System no blow!, What am I missing? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jsaum |
 Oct 2 2014, 11:26 PM
Post
#1
|
|
Senior Member  Group: Members Posts: 530 Joined: 12-June 07 From: Everett, WA Member No.: 7,809 Region Association: None  |
I'm trying to get everything working on my 72 914 including the fresh air blower and defroster control on the dash. I traced down the power going to the control selector lever for the three speeds, the red & white wire which does have 12 volts but it doesn't connect to anything! Am I missing a connector or a wiring harness that gets power to the blower motor from the dash? There isn't any bulbs or holders for the red and blue bezels on the control panel it seems like there should be more there!
Thanks for the help! Jsaum Attached thumbnail(s)  
|
   |
 
|
  |
Replies
| etcmss |
Oct 4 2014, 04:08 AM
Post
#2
|
|
etcmss Group: Members Posts: 183 Joined: 20-April 06 From: Lancaster, Ky Member No.: 5,899 Region Association: Upper MidWest |
relay is on the main fuse panel.
http://bowlsby.net/914/Classic/zTN_Elect_R...inFusepanel.jpg are you sure you have good contact to allow the fan to run? recently had this trouble and although the lights worked the fan was not getting power enough to operate. Had to clean the electrical slide fingers more and it finally cleared up. Some models had a screen at the hood grill to prevent this debris from getting into the fan---is yours there? this picture was from a 71. the left side light socket may be loose and laying on the lower dash pad, but its likely there. Gary Attached thumbnail(s) 
|
|
|
|
Posts in this topic
jsaum Ventilating System no blow! Oct 2 2014, 11:26 PM
AvalonFal I can tell you how a '74 works because I just ... Oct 3 2014, 07:07 AM cary What you have in fingers is the indicator bulb hol... Oct 3 2014, 07:18 AM BeatNavy I also JUST went through this on a '72. I agr... Oct 3 2014, 07:56 AM Philip W. ive started the process of trying to get mine work... Oct 3 2014, 09:37 AM jsaum OK thanks for all the great info it all makes sens... Oct 3 2014, 10:35 AM
AvalonFal
OK thanks for all the great info it all makes sen... Oct 3 2014, 10:39 AM BeatNavy I tore into my '72 fan housing too look at the... Oct 3 2014, 05:25 PM BeatNavy
I tore into my '72 fan housing too look at th... Oct 4 2014, 09:25 AM jsaum Well I made some progress but no sucess in getting... Oct 3 2014, 09:56 PM jsaum Does anyone have a picture of the wiring harness f... Oct 4 2014, 12:08 PM AvalonFal
Does anyone have a picture of the wiring harness ... Oct 4 2014, 01:23 PM jsaum OK that explains why I can't find it! I ch... Oct 4 2014, 01:50 PM etcmss attached wiring drawing for 72-73.
the lights ar... Oct 5 2014, 04:05 AM jsaum
attached wiring drawing for 72-73.
the lights a... Oct 9 2014, 02:33 PM clapeza
[quote name='etcmss' post='2094145' date='Oct 5 2... Oct 9 2014, 03:27 PM jsaum I made some progress at the fuse box figured out w... Oct 9 2014, 11:05 PM Philip W. so (jsaum) what did you find out on this? was the ... Oct 31 2014, 09:23 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 03:06 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.