 Pretty sure this is not right..., Causes?... Solutions?... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| ezbngreen914 |
 Nov 4 2014, 10:51 PM
Post
#1
|
|
Member  Group: Members Posts: 441 Joined: 11-December 10 From: Sautee, GA Member No.: 12,472 Region Association: South East States  |
looks like one side is wearing a lot more than the other. Whats up with that?
 |
   |
 
|
  |
Replies
| orangecrate |
Nov 4 2014, 11:32 PM
Post
#2
|
|
Member Group: Members Posts: 169 Joined: 16-September 13 From: Apache Junction AZ Member No.: 16,394 Region Association: Southwest Region |
If ya want to do the work yourself, rebuild it. Not that hard. Take that money you were paying some one and buy tools.!! Oh If you clamp that loose piston down in the hole ,you can use the pedal to blow the other out. After you remove the pads. Better than using air and making that piston a bullet! OOOHHH Is that the rear caliper? I see that adjustment nut on the side. That is a little more tricky!!! You want to be VERY careful pulling that apart. Read the manual before you even touch it. There is some adjustment mechanism inside and it is a real BITCH to get back together if it comes apart. Ask me how I know. You want to ADJUST the piston all the way out before you pull it. Just blowing it or pulling it out will make you a very unhappy camper!
|
|
|
|
Posts in this topic
ezbngreen914 Pretty sure this is not right... Nov 4 2014, 10:51 PM
914bub I'm going with caliper rebuild for the win....... Nov 4 2014, 10:57 PM partwerks So then, one pad has been dragging all that time?? Nov 4 2014, 11:03 PM
cn2800
So then, one pad has been dragging all that time?... Nov 4 2014, 11:08 PM ezbngreen914
So then, one pad has been dragging all that time... Nov 4 2014, 11:17 PM ezbngreen914 I have been eyeing some of the shiny stuff on PMBs... Nov 4 2014, 11:05 PM Rand Eric can fix you right up. Nov 4 2014, 11:35 PM RobW Your sucky brakes should have really sucked..... 5... Nov 5 2014, 12:48 AM ezbngreen914
Your sucky brakes should have really sucked..... ... Nov 5 2014, 01:51 PM bandjoey Rebuild videos on pelican and I PMB. Check them ou... Nov 5 2014, 01:33 PM Socalandy PMB :drooley: Nov 5 2014, 02:07 PM mgp4591
looks like one side is wearing a lot more than th... Nov 5 2014, 02:30 PM 76-914 Yep, Erc sells a nice kit and is usually complete.... Nov 6 2014, 09:36 AM orangecrate Grease gun method?? Please elaborate. I'm ce... Nov 6 2014, 12:21 PM cpavlenko go to www.PMBperformance.com, and watch the video.... Nov 6 2014, 01:59 PM bdstone914 Pull the pad from the one that is stuck. Press the... Nov 6 2014, 02:47 PM orangecrate Yes yes yes PMB Gonna need a couple of those re... Nov 6 2014, 10:52 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 11th May 2025 - 11:55 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.