 930 CV's and SwayAway Axle Length / 993 Conversion |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| roblav1 |
 Nov 7 2014, 12:36 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 528 Joined: 18-September 12 From: KY Member No.: 14,943 Region Association: MidAtlantic Region  |
First, I want to positively verify that a particular 915 type Sporto coarse flange will work in the 914 box. I have two 108mm transaxle output flanges with a 925XXXXX part number indicating from a 915 Sporto (not a 901 Sporto). I carefully measured them and they are precisely the same as the 914 type (except the size of the flange!). If anyone wants it, I can get the part number off mine (they are in the shop)... I happened to see a couple of these on EBay for what I think is cheap money.
On the other side, in the trailing arm, the 108mm flange is quite the tight fit! So that and the 5 lug 911 hubs are all installed with new bearings in the trailing arms. Soooo... I intend to use new 930 type CV's and SwayAway axles. Does anyone know offhand the required axle length? I don't have the 993 engine in the car yet but want to get these things ordered. Seems to me the axles should be slightly shorter than standard 914 since the 930 CV's are a bit thicker. Yes, I have checked for this info here... if the info is here, sorry I missed it in my search! Thanks, R |
   |
 
|
  |
Replies
| Krieger |
Nov 7 2014, 01:15 AM
Post
#2
|
|
Advanced Member Group: Members Posts: 4,803 Joined: 24-May 04 From: Santa Rosa CA Member No.: 2,104 Region Association: None 
|
I think the stock axle length is 20.25". The Sway Away set up is to let the axle free float in the cvs. No circlips are used to lock the CBS to the axles.
|
|
|
|
Posts in this topic
roblav1 930 CV's and SwayAway Axle Length / 993 Conversion Nov 7 2014, 12:36 AM
Krieger 944 cvs
This link may work. Some info in this th... Nov 7 2014, 01:20 AM Mark Henry This thread tells you all you need to know. First ... Nov 7 2014, 06:37 AM era vulgaris I used these chromoly axles on my car:
http://www.... Nov 7 2014, 07:36 AM Mike Bellis I use Pacific Custom's axles with my Boxster 6... Nov 7 2014, 08:45 AM
roblav1 Thanks for all the replies and recommendations.
... Nov 7 2014, 10:08 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 02:32 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.