 Cutting Tool, What is the best tool for cutting laierd sheetmetal/no torch |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| xperu |
 Dec 11 2014, 03:10 PM
Post
#1
|
|
TEXAS  Group: Members Posts: 597 Joined: 13-June 06 From: League City Texas Member No.: 6,213 Region Association: None 
 |
I have a small area I want to cut out which is like two ply metal. Is a metal cutter best or jigsaw. I will have to buy whichever one, so I thought I'd ask. Thanks Mike
|
   |
 
|
  |
Replies
| madmax914 |
Dec 11 2014, 03:38 PM
Post
#2
|
|
Member Group: Members Posts: 204 Joined: 16-February 14 From: Salem, Oregon Member No.: 17,007 Region Association: Pacific Northwest |
If its in an open area an mostly flat I'd use a jig saw with a metal blade. If its tight and uneven I'd use a 4-1/2" cut off wheel on a grinder. If you're cutting out an area and not starting on the edge you'll need the cut off wheel to cut through the metal so you can use the jig saw.
|
|
|
|
Posts in this topic
xperu Cutting Tool Dec 11 2014, 03:10 PM
76-914
I have a small area I want to cut out which is li... Dec 11 2014, 03:22 PM stugray If you have the room to get in there, my first cho... Dec 11 2014, 03:54 PM Mark Henry A small angle grinder with a razor blade grinding ... Dec 11 2014, 05:35 PM barefoot I've used a multi-tool. HF sells one and has l... Dec 11 2014, 07:21 PM
Amphicar770 http://www.eastwood.com/air-body-saw.html Easier... Dec 11 2014, 08:19 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 10:29 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.