 Cockpit substructure, Thinking about drilling a hole through it |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Randal |
 Jan 22 2015, 10:00 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 4,446 Joined: 29-May 03 From: Los Altos, CA Member No.: 750  |
Thinking about drilling a 3/4 inch hole through the firewall to an Accusump on the other side. The Accusump will sit facing backwards towards the cockpit firewall mounted where the seat normally goes.
Anyone ever drilled through this section. There is a black arrow where I want the hole. All advice appreciated.  BTW I'm going to cover up that higher hole where the lines used to run to the front cooler. |
   |
 
|
  |
Replies
| ChrisFoley |
Jan 22 2015, 07:28 PM
Post
#2
|
|
I am Tangerine Racing Group: Members Posts: 7,986 Joined: 29-January 03 From: Bolton, CT Member No.: 209 Region Association: None 
|
Aeroquip AQP Socketless Hose
|
|
|
|
| Randal |
Jan 22 2015, 10:21 PM
Post
#3
|
|
Advanced Member Group: Members Posts: 4,446 Joined: 29-May 03 From: Los Altos, CA Member No.: 750 |
QUOTE(Racer Chris @ Jan 22 2015, 05:28 PM)  Aeroquip AQP Socketless Hose Sure looks like a lot easier to work with as compared to the SS wrapped lines. Decided to go that way, but the pliers to crimp the clamps, recommended in high temperature situations, was $80 bucks. Ouch. Oh well another interesting tool to place in the green felt. |
|
|
|
| SirAndy |
Jan 22 2015, 10:40 PM
Post
#4
|
|
Resident German Group: Admin Posts: 42,207 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
QUOTE(Randal @ Jan 22 2015, 08:21 PM) the pliers to crimp the clamps, recommended in high temperature situations, was $80 bucks. I've been running this setup without clamps for years now, never had a problem. (IMG:style_emoticons/default/smile.gif) |
|
|
|
Posts in this topic
Randal Cockpit substructure Jan 22 2015, 10:00 AM
Racer Chris You can put a bulkhead fitting through the pocket ... Jan 22 2015, 10:22 AM
Randal
You can put a bulkhead fitting through the pocket... Jan 22 2015, 12:19 PM Rob-O :agree:
What Chris said. The center of that dim... Jan 22 2015, 10:55 AM Randal
:agree:
What Chris said. The center of that di... Jan 22 2015, 12:19 PM Steve I drilled a 3/4" hole in that dimple to run t... Jan 22 2015, 12:11 PM McMark To expand on what Chris said, that area is a boxes... Jan 22 2015, 12:13 PM SirAndy If I were doing it here, I would drill through the... Jan 22 2015, 12:22 PM Kansas 914
If I were doing it here, I would drill through th... Jan 22 2015, 12:54 PM Randal
If I were doing it here, I would drill through th... Jan 22 2015, 06:21 PM SirAndy What is that blue line called? Looks like it just... Jan 22 2015, 08:17 PM Mark Henry
What is that blue line called? Looks like it jus... Jan 22 2015, 11:13 PM Randal
[quote name='SirAndy' post='2137301' date='Jan 22... Jan 23 2015, 06:58 PM SirAndy Isn't that Parker Pushlok hose?
The Parker Pu... Jan 23 2015, 07:28 PM JRust :agree: That's is effective & looks good.... Jan 22 2015, 06:03 PM Randal
the pliers to crimp the clamps, recommended in h... Jan 22 2015, 10:56 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 07:31 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.