Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> Forced Air? TURBO?
bob91403
post Sep 17 2004, 02:56 AM
Post #1


Senior Member
***

Group: Members
Posts: 618
Joined: 15-September 04
From: Los Angeles, CA
Member No.: 2,763



Could someone tell me why a scoop can't increase air pressure, as you go faster, and create the same kind of HP "boost" you get from turbo or superchargers? Excuse me for being ignorant. But, isn't it just a matter of increasing air pressure to the intake, and pumping in the right amount of gas for mixture? What about a pressurized tank of air, or both air and propane tanks? Couldn't you use a small compressor for boost, or as a source to refill a "boost" tank? I really don't understand this obcession with tubocharging. Nitrous systems have been around for a long time, and are much simpler. I was told, by my top rated Porsche mechanic, that, "Yeah, higher compression heads, turbocharging, supercharging, nitrous oxide, will all increase horsepower. But, anything you do to increase the horsepower will seriously lower the longevity of the engine." He doesn't even recomend european compression heads for a rebuild. I do understand, tubocharging a smaller engine gives you increased horsepower, plus the weight advantage of not having to put in a 3.2L six. But, if you have to rebuild it every 50K, instead of 150K miles, doesn't conversion cost less? Curious to hear your replies.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Replies
redshift
post Sep 17 2004, 03:41 AM
Post #2


Bless the Hell out of you!
**********

Group: Members
Posts: 10,926
Joined: 29-June 03
Member No.: 869



A rebuilt 2.0 cost $6,000.00, a rebuilt 3.2 cost more than twice that. To convert a 2.0 to a turbo, you need a turbo, a shoestring, and some PVC.

To use nice parts, it's going to cost you more than a 2.0 rebuild to modify the car for a 3.2

You can't use a scoop to 'turbo' your car, because you'd have to be going about 300 miles per hour, and have a very odd tube that is shaped like a trumpet, with a 5' mouth, and 18' long on top of your car to collect the air.

Nitrous is for somebody else, we aren't drag racers.

(IMG:style_emoticons/default/smile.gif)

Superchargers are rare around here, when you find one, let me know.


M
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



- Lo-Fi Version Time is now: 11th May 2025 - 01:32 AM