1980 model 911 3.0 in 914, Flywheel question and others? Options

[porschetub]

Hi guys ,for those that have an SC 3.0 in these cars I need the following info as I have been offered for a great price a complete motor with 123K kms documented history.
Anyone got over the situation of clearing the engine lid over the injection system,my lid is sans rain tray and setup for a six already,if that means s#it all.
Been on PMS site and thought there was a conversion flywheel for this engine swap?as silly as it sounds can I engineer a 215mm flywheel to nine bolt crank and fit that,torque figures are not hugely different from say a 911T or 911E of that era.
Flame if you like but I don't want to go to the larger clutch/flywheel and the changes required to get the thrust bearing movement corrected,as in push clutch to pull clutch action.
I feel that I would be happy with this motor the owner is known to me and has a good reputation for honesty,his motivation for selling is an upgrade to a 3.2 in his 76 911s and then finding it needs a fully top overhaul,his motivation for selling the 3.0.

[Jeffs9146]

Here is what I did with my CIS! No cutting.

No need to replace the flywheel. You need the clutch, pressure plate and flywheel ring gear. I bought mine from PMS.

[porschetub]

Here is what I did with my CIS! No cutting.

No need to replace the flywheel. You need the clutch, pressure plate and flywheel ring gear. I bought mine from PMS.

Thanks DD Mark and Jeff,so transposing the injection gives the clearance required with the deck lid Jeff ?.
I can see how the stock air cleaner would be in the way height wise as it appears the highest point of the motor?
I don't see how I could easily drop the motor lower DD as I have a stock copy mount welded to the firewall I would think however there would be scope for altering the crankcase mount somehow,the limit here would be the seals around the engine sheet metal .
So the 228mm pressure plate that Kennedy sell is the correct push type for my gearbox ?if so this would be better than making a custom 9 bolt 215mm flywheel.
Keep the info coming guys much appreciated (IMG:style_emoticons/default/beer.gif)