 Help with rear shocks and adjustment please |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Wyvern |
 Jun 7 2016, 12:42 AM
Post
#1
|
|
Member  Group: Members Posts: 324 Joined: 7-October 15 From: San Francisco (East Bay) Member No.: 19,245 Region Association: Northern California  |
I have these shocks on my 73 1.7
They seem "ok" but just want to understand their adjustment. From my research they are Koni "Reds" Question 1 ... My car rides high (I think so) Measuring the "donuts" as what I understand is the preferred method I am at 6 1/2" on the rear and 5 1/2 at the front. Am I correct that the clip on the spring perch can be moved down to correct rear ride height ? ... then adjust the front torsion bars (yes ,,, then alignment) I thought they had 5 grooves. Looks like (I am in 2nd from the top / highest. What height should I be targeting ? Question 2 ... I have found 3 different instructions on adjusting the compression / rebound . any help with the correct way and info ? Thanks   |
   |
 
|
  |
Replies
| r_towle |
Jun 7 2016, 10:51 PM
Post
#2
|
|
Custom Member Group: Members Posts: 24,705 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States 
|
Btw, the proper and correct setting is the front is actually about 3/8 in higher than the rear so when you stop quickly the weight shift does not make the rear end slide so quickly.
It has a look many do not like, but it's how it is supposed to be setup. |
|
|
|
Posts in this topic
Wyvern Help with rear shocks and adjustment please Jun 7 2016, 12:42 AM
Larmo63 I would drop the rear down to the lowest setting a... Jun 7 2016, 06:32 AM
Wyvern
I would drop the rear down to the lowest setting ... Jun 7 2016, 11:18 AM Luke M To adjust the koni shock you need to turn the litt... Jun 7 2016, 06:35 PM Wyvern Thanks "Luke" ... I saw your post after ... Jun 7 2016, 10:23 PM r_towle Drop them to the bottom notch.
Set the front end a... Jun 7 2016, 10:26 PM Wyvern ^^^ Tnks
Hmmmm . if my goal was front 3/8 lower t... Jun 7 2016, 10:44 PM r_towle No,
Your rear shocks have adjustable spring perch... Jun 7 2016, 10:47 PM Wyvern
No,
Your rear shocks have adjustable spring perc... Jun 7 2016, 11:59 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd March 2026 - 02:00 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.