Turbocharging a type 4 Options

[stownsen914]

I have heard the conventional wisdom that "you can't turbocharge a type 4 successfully." Is it just difficult, or can it really not be done well? I'm tossing around the crazy idea of turbo'ing a type 4 for PCA club racing, to put in the chassis in my avatar. My 6 in its current configuration is not competitive, so I can put a bunch of money in that, or do something different. I like a challenge, so why wouldn't the following work?

- 1.8 or 2.0 type 4 as a base. I would keep displacement stock or close to it.
- EFI for induction
- Properly sized intercooler and huge oil cooler
- A good aftermarket cooling fan
- Would be dry sumped
- I would work with a knowledgeable builder or shop to build the engine. I am not so familiar with type 4 race modifications, but presumably this would include reinforcing the bottom end, using Carrillo, Pauter, etc. rods
- Obviously the heads would need to be reworked for flow and possibly reliability

If I do the above, could a type 4 be built to withstand 15 psi of boost and make 350 hp reliably?

Scott

[Andyrew]

He needs to be in the 1.8 to 2.0L range to run a turbo.

If he went water cooled he could run a vw 2.0L block from a 924. Im not sure if a better designed DOHC head would fit on that block but that would be a killer setup and let you make a ton of potential power.