 Trying to rebuild my pedal cluster, rust fighting back >> got it apart |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Chris914n6 |
  Nov 27 2016, 05:48 PM
Post
#1
|
|
Jackstands are my life.  Group: Members Posts: 3,407 Joined: 14-March 03 From: Las Vegas, NV Member No.: 431 Region Association: Southwest Region  |
I popped the roll pin out of the clutch arm. Soaked it, hammered it, stuck it in a vise and muscled it, no budge. What's the trick?
|
   |
 
|
  |
Replies
| Chris914n6 |
Mar 28 2017, 12:26 AM
Post
#2
|
|
Jackstands are my life. Group: Members Posts: 3,407 Joined: 14-March 03 From: Las Vegas, NV Member No.: 431 Region Association: Southwest Region |
Round 2. FIGHT!
Melted the bushings out no problem. Mounted in press, cooked the end, got it to pop to about middle of the pin hole. Mounted in vice, filed the lip, cooked end again, can't get it to twist. I've got it soaking overnight. Luckily this is an extra one. |
|
|
|
Posts in this topic
Chris914n6 Trying to rebuild my pedal cluster Nov 27 2016, 05:48 PM
mepstein Our mechanics always use heat to unstick things an... Nov 27 2016, 05:58 PM BeatNavy It was a royal PITA for me. I soaked it with PB. ... Nov 27 2016, 06:00 PM gms if you don't have a press try an air chisel an... Nov 27 2016, 06:24 PM
Chris914n6
if you don't have a press try an air chisel a... Nov 27 2016, 08:19 PM
worn
if you don't have a press try an air chisel a... Aug 26 2017, 09:22 AM Elliot Cannon Or send it to bdstone914. Nov 27 2016, 06:51 PM injunmort i am confused. did you get the roll pin out and no... Nov 27 2016, 06:51 PM porschetub
I popped the roll pin out of the clutch arm. Soak... Nov 27 2016, 08:21 PM Chris914n6 I can see the confusion now. I'm trying to get... Nov 27 2016, 08:44 PM bdstone914
I popped the roll pin out of the clutch arm. Soak... Nov 27 2016, 10:09 PM rjames When I rebuilt mine I had the same issue and ended... Nov 27 2016, 11:22 PM bdstone914 Here are some pics. Pound the shaft into the clutc... Nov 28 2016, 12:04 AM whitetwinturbo :woohoo: :popcorn: :woohoo: :worship: :worship... Nov 28 2016, 11:24 PM mb911 Bruce what bushing kit brand do you recommend and ... Nov 29 2016, 04:45 PM bdstone914
Bruce what bushing kit brand do you recommend and... Nov 29 2016, 09:04 PM Rsjg911 Sounds like rebuilding your cluster turned into a ... Nov 29 2016, 05:53 PM Chris H. That job that is rarely worth doing yourself. The... Nov 29 2016, 07:38 PM mepstein
That job that is rarely worth doing yourself. Th... Nov 29 2016, 07:59 PM bdstone914 To the OP: did you get it apart? did the pictures ... Nov 29 2016, 09:01 PM Chris914n6
To the OP: did you get it apart? did the pictures... Nov 29 2016, 10:32 PM Chris914n6 Trying to get everything that needs to go thru the... Aug 25 2017, 10:31 PM bdstone914
Trying to get everything that needs to go thru th... Aug 26 2017, 09:01 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 31st October 2024 - 07:03 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.