GT front bonnet Hood pin kit Options

[Marek]

I offer a GT Inspired Front bonnet hood pin kit !

Inspired from the original race cars,
I made them of stainless steel - polished up , as the alloy ones I tried
look a bit bumpy after a while
they have the bended edges as the original ones I have seen
so they are not just a flat piece

the Kit contains

* 4 polished stainless steel plates with a center hole for the pin
( You can order these with out the center hole )
all 4 plates got 4 holes in the corners for the stainless steel rivets which are incl

* 4 alloy pins , copy taken of org car

* 4 locks

* 18 4 mm rivet´s then you got 2 for spare

my advice is to mount the plates firsts , drill a hole in the bonnet for the pin and rivets
and fit the pins to match the hole afterwords, pretty straight forward
if you got a fiber decklid I would advice to use a small washer underneath the rivet
so the rivet dont shred the fiber

I will post better pics asap , but I hope you get the idea

The price is 200 EURO for a kit INCL SHIPPING - Paypal ok

By interest please send me a email to

Early911parts@gmail.com

DO note due to custom clearence , snowstorms etc you must expect up to 30 days delivery , Do Note I am from Copenhagen - Denmark
as you may say on the worng side of the pond

Regards
Marek

[MikeSpraggi]

Do you still have any of these left?