 SS exchangers |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| StratPlayer |
 Jul 6 2017, 07:11 AM
Post
#1
|
|
StratPlayer  Group: Members Posts: 3,325 Joined: 27-December 02 From: SLC, Utah Member No.: 27 Region Association: Rocky Mountains 
 |
Great write up PMB has done on SS exchangers. My car is in for some work and they discovered this problem with my exchangers.
Folks with SS exchangers should give a look. https://www.facebook.com/PMBPerformance/pho...9673193/?type=3 |
   |
 
|
  |
Replies
| North Coast Jim |
Jul 6 2017, 01:24 PM
Post
#2
|
|
Member Group: Members Posts: 339 Joined: 11-December 15 From: Northern Ohio Member No.: 19,450 Region Association: MidAtlantic Region
|
Both of mind cracked the same way. One was welded and I couldn't get it sealed again. Probably due to stress on one side of the pipe due to the welding operation and it's ever so slightly bent out of position. Won't try it again.
So I've bought two more. Wish me luck...................and I am using the 18ft Lb torque with a quality ratchet and ensuring there are no burrs on the fastening surface. |
|
|
|
Posts in this topic
StratPlayer SS exchangers Jul 6 2017, 07:11 AM
GeorgeRud Important information! Please be sure to have... Jul 6 2017, 07:47 AM
Mark Henry
Important information! Please be sure to hav... Jul 6 2017, 07:57 AM 02loftsmoor I haven't been on in a while,, what's goin... Jul 6 2017, 07:59 AM Shadowfax Yep. Mine looked almost that bad. There were some ... Jul 6 2017, 08:48 AM 914_teener This is a typical result of crevice cracking from ... Jul 6 2017, 09:39 AM 914_teener Mine did the exact same thing. Jul 6 2017, 09:40 AM Spoke Mine cracked as well. Jul 6 2017, 10:12 AM 914_teener Here is how to fix it. These should be TIG welded ... Jul 6 2017, 10:45 AM rhodyguy Over torquing to cure a leaky he does a nice job o... Jul 6 2017, 11:22 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 02:13 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.