 how to get out rusted rocker panel screws, I tried everything I know... |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| 914 RZ-1 |
 Aug 27 2017, 08:01 PM
Post
#1
|
|
Porsche Padawan  Group: Members Posts: 684 Joined: 17-December 14 From: Santa Clarita, CA Member No.: 18,230 Region Association: Southern California  |
I had to take off my rocker panels. The screws on the passenger side were impossible to screw off. I tried: liquid wrench, screwdriver, screwdriver with wrench, screwdriver with impact wrench (stripped slot on heads), vise grips, bolt removers (with impact wrench), hammer (tapped screws to see if I could loosen the rust), screw extractor (broke 2 drill bits and 2 extractors) and torch. Finally gave up and used a cut-off wheel to cut the heads off.
There are bolt threads sticking out of the holes. I have sprayed them with more Liquid Wrench. Any ideas on how to remove these? I'd like to put screws back in the same holes. I got hex head bolts instead of those infernal cheeseheads. |
   |
 
|
  |
Replies
| Dave_Darling |
Aug 27 2017, 08:21 PM
Post
#2
|
|
914 Idiot Group: Members Posts: 15,196 Joined: 9-January 03 From: Silicon Valley / Kailua-Kona Member No.: 121 Region Association: Northern California 
|
Weld a nut onto them. The heat should help break the bonds that hold the bolt in, and you'll have a nice larger area to apply pressure to when you put a wrench on it.
--DD |
|
|
|
| 914 RZ-1 |
Aug 27 2017, 08:29 PM
Post
#3
|
|
Porsche Padawan Group: Members Posts: 684 Joined: 17-December 14 From: Santa Clarita, CA Member No.: 18,230 Region Association: Southern California |
QUOTE(Dave_Darling @ Aug 27 2017, 07:21 PM)  Weld a nut onto them. The heat should help break the bonds that hold the bolt in, and you'll have a nice larger area to apply pressure to when you put a wrench on it. --DD Good idea, now I just need to find someone who can weld them! (IMG:style_emoticons/default/smile.gif) Do you think a local shop would do it? I might also have a friend of a friend I could ask. Any idea on what I'd pay someone? I have some holes in the rockers that need patching; maybe I'll have them do the bolts, then see if they can do the holes... (IMG:style_emoticons/default/idea.gif) |
|
|
|
Posts in this topic
914 RZ-1 how to get out rusted rocker panel screws Aug 27 2017, 08:01 PM
pete000
I had to take off my rocker panels. The screws on... Aug 27 2017, 08:09 PM
914 RZ-1 Heat them up till they are glowing red and use vic... Aug 27 2017, 08:30 PM burton73 Just have a squirt bottle ready Aug 27 2017, 08:57 PM mepstein Heat till red. Touch an old candle to the threads ... Aug 27 2017, 09:08 PM bdstone914
Heat till red. Touch an old candle to the threads... Aug 27 2017, 09:39 PM whitetwinturbo ...........leave in garage, set house on fire, the... Aug 28 2017, 09:09 PM DM_2000 When removing rusted bolts it is critical not to t... Aug 29 2017, 08:09 AM mgphoto Post a photo of the "holes that need to be pa... Aug 29 2017, 09:50 AM rhodyguy Drill out and retap. No one will ever know. Aug 29 2017, 11:33 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 6th July 2025 - 08:44 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.