OT water in compressor, how to minimize/eliminate this? |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
OT water in compressor, how to minimize/eliminate this? |
914 RZ-1 |
Sep 9 2017, 06:16 PM
Post
#21
|
Porsche Padawan Group: Members Posts: 683 Joined: 17-December 14 From: Santa Clarita, CA Member No.: 18,230 Region Association: Southern California |
If anyone has any experience with air compressors, I'd like some help/advice regarding the following:
I have a 30 gallon Craftsman compressor (built in 2008). 8.6/6.4 CFM @ 40/90 psi. I have a moisture filter before the hose hook-up. 1. RUSTY WATER IN THE TANK When I drain the tank, there is always rusty water, maybe 1/4 cup or so. I know this is normal, but how much is supposed to come out? Is there an standard/typical amount that is normal? 2. WATER IN THE HOSE I also get air in the hose that comes out whenever I use air tools. I get a few drops every few minutes. When I bleed the moisture filter, no moisture comes out. 3. IN-LINE FILTER I'm thinking of getting another in-line moisture filter. I will be painting some parts soon and want to make sure that I don't spray water with the paint. What do I look for in a decent, in-line moisture filter? Thanks! |
jacksun |
Sep 10 2017, 06:35 AM
Post
#22
|
Member Group: Members Posts: 236 Joined: 8-August 13 From: mi Member No.: 16,224 Region Association: Upper MidWest |
while not convenient, I used two bags of ice at the lowest point of my hose and routed the hose upward after the ice. drain the hose after each painting. you could coil your hose in a large bucket and place ice over the coil.
here are a couple possibilities, one for at the input to the spray gun and the other, while expensive should cure the problem. at the gun expensive images from eastwood I used the "at the gun" and the ice and cured my water problem. I also kept an eye on the humidity level and planned my painting accordingly. |
Lo-Fi Version | Time is now: 2nd June 2024 - 03:43 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |