 Fuel pump stopped working a couple of days ago, could it be the relay board |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| JimN73 |
 Sep 24 2017, 11:50 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 535 Joined: 6-October 07 From: Gig Harbor Member No.: 8,192 Region Association: Pacific Northwest  |
I have no power at the pump.
I have 12.4 volts at pin #13 on the relay board. No power at pin #5 or 7, old eyes can't see the stripe colors very well. Fuses are good. Am I missing something? Thanks in advance. |
   |
 
|
  |
Replies
| JimN73 |
Oct 6 2017, 01:22 PM
Post
#2
|
|
Senior Member Group: Members Posts: 535 Joined: 6-October 07 From: Gig Harbor Member No.: 8,192 Region Association: Pacific Northwest |
Well, here is the final answer - I think.
Thanks for all the diagnostic tips, tried them all. The answer came from the 22 step diagnostic that Olympic 914 sent. http://www.google.com/url?sa=t&rct=j&a...S8A4uDTjQ-CvZDQ I started at the beginning and got positive results until I got to number 21 (skipped the ones referencing the ECU): Fuel pump harness to relay board. No power. I removed the terminal at the end of the fuel pump wire, still no power. The board tests OK - no resistance between relay and pin 13), so plug half of the 14 pin connector is toast? I'm not sure what to do next, for now, I'm running the pump off a switch power fuse. Thanks for all your help. |
|
|
|
Posts in this topic
JimN73 Fuel pump stopped working a couple of days ago Sep 24 2017, 11:50 AM
JimN73 and:
3.5 psi pump for carbs, and
the relays are ... Sep 24 2017, 12:35 PM
Dave_Darling
and:
3.5 psi pump for carbs, and
the relays are... Sep 24 2017, 03:00 PM JimN73
and:
3.5 psi pump for carbs, and
the relays ar... Sep 24 2017, 03:32 PM Elliot Cannon Mine stopped working about a month ago. I tapped ... Sep 24 2017, 01:49 PM JimN73
Mine stopped working about a month ago. I tapped... Sep 24 2017, 02:25 PM JimN73 After cleaning some corrosion around pin13 and 14,... Sep 29 2017, 07:24 PM Spoke Power to the fuel pump relay is provided by the po... Sep 30 2017, 09:37 PM euro911 When you turn the key to the 'on' position... Oct 1 2017, 12:55 AM Olympic 914 try this troubleshooting sequence. it worked for m... Oct 1 2017, 09:45 AM cary Here's what I finally did on Matt's car. H... Oct 1 2017, 09:51 AM JimN73 Thanks, all. More troubleshooting and maybe some ... Oct 1 2017, 05:10 PM euro911 You can probe the wire outbound of the connector t... Oct 6 2017, 08:08 PM JimN73
You can probe the wire outbound of the connector ... Oct 7 2017, 10:57 AM euro911
You can probe the wire outbound of the connector... Oct 7 2017, 01:26 PM injunmort here is a simple test, fast, effective and isolate... Oct 7 2017, 11:23 AM Spoke I'm a bit confused on what you have found so f... Oct 7 2017, 11:43 AM euro911 ... As an aside, I've found when working in th... Oct 7 2017, 01:16 PM JimN73 Here's what I have done. I think I covered eve... Oct 9 2017, 10:04 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 3rd November 2025 - 07:18 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.