GB steering shaft bearing $26 reg $38 others sell for $106!, 901.347.2414.01 New # 911.347.029.01 ENDS 11/15/17 |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
GB steering shaft bearing $26 reg $38 others sell for $106!, 901.347.2414.01 New # 911.347.029.01 ENDS 11/15/17 |
Mikey914 |
Oct 9 2017, 05:27 PM
Post
#1
|
The rubber man Group: Members Posts: 12,671 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
These are the steering shaft bearings that also cross over to 911. We have actually been able to improve on the design some and these make a very nice fit. You can buy them on this GB when we are ready to ship (end of the week or so).
In purchasing this you also have the option to include the puck ( 901.347.201.02, for $22 Hardware (including new washers - the ones that bend up as shown) for $8 more 2 elliptical washers ( 901.347.248.00) with 4 bolts as shown. We are also working on the rubber that holds the bearing 901.347.223.03 that is NLA for $10. You will only be able to get the special pricing on the add-ons if you buy the bearing at a greatly reduced price. So.... Whos in? Attached thumbnail(s) Attached image(s) |
mbseto |
Nov 15 2017, 09:02 PM
Post
#2
|
Senior Member Group: Members Posts: 1,253 Joined: 6-August 14 From: Cincy Member No.: 17,743 Region Association: North East States |
Went out and yanked this off my shaft. All wrapped up in rubber like that, I can't imagine this thing ever wears out. Mine is gummed up a little from the old rubber but has no play in it. Seems like the real gem of this set is not PN 26, but PN 22 and 30. Sign me up!
Base on your initial post, $22 for the bearing, $10 for the rubber bushing, $8 for the hardware comes to $40... PN 22 is circled in the diagram but not sure where it fits in the price scheme? |
Mikey914 |
Nov 15 2017, 09:50 PM
Post
#3
|
The rubber man Group: Members Posts: 12,671 Joined: 27-December 04 From: Hillsboro, OR Member No.: 3,348 Region Association: None |
Went out and yanked this off my shaft. All wrapped up in rubber like that, I can't imagine this thing ever wears out. Mine is gummed up a little from the old rubber but has no play in it. Seems like the real gem of this set is not PN 26, but PN 22 and 30. Sign me up! Base on your initial post, $22 for the bearing, $10 for the rubber bushing, $8 for the hardware comes to $40... PN 22 is circled in the diagram but not sure where it fits in the price scheme? Sorry had to borrow the drawing that has the puck highlighted. It is actually $19. You can add the spacers for the puck with new bolts and the special washers for puck hardware for $8 - 4 bolts, 4 spacers, and 2 elliptical washers. The rubber is still getting finished so Im going to keep this one open til the 20th. I'll hit you with the codes. Mark |
Lo-Fi Version | Time is now: 23rd May 2024 - 08:48 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |