Update/ My 914 Gallery, The engine Turned! || My 914 Gallery Options

[keizeikeitara]

So me and my shop guys were able to get it the engine to turn over and I am so so so happy. Now I don't need a new engine, probably just needs a tune up kit on it.

Now below is my google gallery.
Now I know there is quite a bit of rust, and thats okay, Im just tired of heading discouragement from non believers!

since the 1.8 L engine runs, I wont be EJ20 swapping it, I am going to be keeping it original.
but hey here is the videos of me getting it to run with my shop guys and the gallery

Keizei's 914 Google Drive Folder Link>> [CLICK ME]

[mepstein]

You will probably need the inner long, outer long, inner wheelhouse, rear floor pans, and inner suspension console. That should get you started. What you see is about 20% of the rust. Not trying to bash you, its just experience with these cars.

[VaccaRabite]

You will probably need the inner long, outer long, inner wheelhouse, rear floor pans, and inner suspension console. That should get you started. What you see is about 20% of the rust. Not trying to bash you, its just experience with these cars.

(IMG:style_emoticons/default/agree.gif)

How these cars were made, battery acid leaked onto a low point on the passenger side long, pooled there, and over the past 40 years ate the metal to bits. Fixing this area is an involved job, but many of our members have done it in thier garage - learning to weld at the same time.

I learned to weld fixing the same area of my car (though it was not nearly as rough as yours).

Zach