Engine Mounts, Engine Mounts |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Engine Mounts, Engine Mounts |
Not_A_Six |
Dec 1 2018, 12:18 PM
Post
#1
|
Member Group: Members Posts: 110 Joined: 28-November 18 From: North Idaho Member No.: 22,682 Region Association: Pacific Northwest |
Hi All-
New member here. I have the engine out of my '73 2.0 to address some fluid leaks and noticed that the engine mounts were unusual. Going through old paperwork, I found that a PO had installed "Club/Sport" engine mounts 15 years ago. The car is a '73 with stock side-shift trans and cross bar with the hole in it for the trans linkage. But the engine is mounted to the crossbar with solid aluminum blocks and the crossbar is mounted to the chassis with rubber -- similar to the older style tail shift factory mounts -- instead of the inboard rubber+outboard solid mount expected. I'm inclined to return it to stock, but I'm trying to understand the purpose of the "Sport" mounts. Online searches suggest that 911 "Sport Mounts" are used somehow for /6 conversions, but I don't know why PO changed from the stock mount with the factory 2L engine/trans. Thanks for your help. FWIW, pic of my baby is attached. |
ndfrigi |
Dec 1 2018, 12:28 PM
Post
#2
|
Advanced Member Group: Members Posts: 2,933 Joined: 21-August 11 From: Orange County Member No.: 13,474 Region Association: Southern California |
|
Not_A_Six |
Dec 1 2018, 12:33 PM
Post
#3
|
Member Group: Members Posts: 110 Joined: 28-November 18 From: North Idaho Member No.: 22,682 Region Association: Pacific Northwest |
|
SirAndy |
Dec 1 2018, 12:42 PM
Post
#4
|
Resident German Group: Admin Posts: 41,669 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
Was this maybe a track mod back in the day? No, see my post above. Your setup makes things worse, especially on the track. (IMG:style_emoticons/default/shades.gif) |
Not_A_Six |
Dec 1 2018, 01:17 PM
Post
#5
|
Member Group: Members Posts: 110 Joined: 28-November 18 From: North Idaho Member No.: 22,682 Region Association: Pacific Northwest |
Was this maybe a track mod back in the day? No, see my post above. Your setup makes things worse, especially on the track. (IMG:style_emoticons/default/shades.gif) Thanks. So, are you saying that the engine would move more with the rubber at the ends of the crossbar than it would with the rubber inboard? On which axis? (Pitch? Roll? Yaw?) I'd guess that it would flex less due to the longer moment arm between the rubber points (unless the outboard rubber is more flexy than the inboard rubber...) Thanks again. I think I'm gonna return it to stock as you suggested. But, I'm just trying to understand why this mod was ever made in the first place. |
SirAndy |
Dec 1 2018, 01:25 PM
Post
#6
|
Resident German Group: Admin Posts: 41,669 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
But, I'm just trying to understand why this mod was ever made in the first place. Ignorance? (IMG:style_emoticons/default/confused24.gif) |
Lo-Fi Version | Time is now: 1st June 2024 - 11:06 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |