914 Airbox HELP, air box control lever fastening bolt |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
914 Airbox HELP, air box control lever fastening bolt |
Str1974 |
Feb 26 2019, 10:30 AM
Post
#1
|
Member Group: Members Posts: 90 Joined: 23-January 19 From: Dallas Member No.: 22,820 Region Association: Southwest Region |
Help, I just refurbished my air box (1974 1.8) with new seals etc. After getting the air box assembled and back into it's place under fresh air vent (what a pain to get those two bolts to line up...)
I can't find the bolt that I had disconnected from the cable (see image #3) As usual I put it in a special place so I would not lose it....yea right. I have gone thru the parts diagram available and I cannot find the bolt that has the small hole in it that allows the cable to go thru it and fasten with washer /nut. I have found the part# for the fastening clamp, but not for the bolt at the end of cable. All the bolts I see available do not have the "eye" hole in it for the cable to go thru and tighten. It won't take a barrel nut in its place. |
iankarr |
Feb 26 2019, 10:56 AM
Post
#2
|
The wrencher formerly known as Cuddy_K Group: Members Posts: 2,481 Joined: 22-May 15 From: Heber City, UT Member No.: 18,749 Region Association: Intermountain Region |
These are on ebay....
https://www.ebay.com/itm/LOT-OF-5-USED-GENU...4!US!-1 and these are new at peilican. I believe it's part no. 901.211.683.00 https://www.pelicanparts.com/catalog/SuperC..._VENTHT_pg3.htm (clamping bolt) it's a 911 part, but there's a lot of crossover. Maybe someone more knowledgable can confirm... |
Str1974 |
Feb 26 2019, 11:13 AM
Post
#3
|
Member Group: Members Posts: 90 Joined: 23-January 19 From: Dallas Member No.: 22,820 Region Association: Southwest Region |
These are on ebay.... https://www.ebay.com/itm/LOT-OF-5-USED-GENU...4!US!-1 and these are new at peilican. I believe it's part no. 901.211.683.00 https://www.pelicanparts.com/catalog/SuperC..._VENTHT_pg3.htm (clamping bolt) it's a 911 part, but there's a lot of crossover. Maybe someone more knowledgable can confirm... Great, thank you so much. |
Lo-Fi Version | Time is now: 9th June 2024 - 09:38 PM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |