 Carbs, Weber 44s |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| cpavlenko |
 Oct 3 2019, 01:59 PM
Post
#1
|
|
Member  Group: Members Posts: 489 Joined: 19-April 12 From: North Arizona Member No.: 14,400 Region Association: Southwest Region  |
I built my 1.7 to a 2.0 with 2 Weber 44s. When I get back from a good cruise and park it in garage, after bout 7 mins later I here a gurgling from the carbs. Fuel dripping on butterfly's. Stinks up my 3 car garage. Me and my mechanic are doing different things. The last thing I tried was pulling a nipple I put on the expansion tank where the charcoal canister line went to the expansion tank. Did another 50 mile cruise, and parked it in the garage and after 7 mins nothing, then a little drip. It was about 3/4 better taking the nipple off. Soooooooooo, what is going on, I'm confused and help would be thankful.
|
   |
 
|
Posts in this topic
Superhawk996 I see you are in AZ. Are you running it hot and t... Oct 3 2019, 03:15 PM
cpavlenko
I see you are in AZ. Are you running it hot and ... Oct 3 2019, 07:40 PM cpavlenko
I see you are in AZ. Are you running it hot and ... Oct 3 2019, 07:41 PM
cpavlenko
I see you are in AZ. Are you running it hot and... Oct 3 2019, 07:47 PM cpavlenko
I see you are in AZ. Are you running it hot and ... Oct 3 2019, 08:31 PM John Do you have any insulators between the heads and t... Oct 3 2019, 03:46 PM johnhora phenolic spacers between the manifold and carb
ht... Oct 3 2019, 06:08 PM cpavlenko I've also heard of putting on/off switch for f... Oct 3 2019, 08:09 PM michael7810
I've also heard of putting on/off switch for ... Oct 4 2019, 10:56 AM cpavlenko Here's some pictures. 2 pictures show plugged ... Oct 3 2019, 08:44 PM cpavlenko
Here's some pictures. 2 pictures show plugged... Oct 3 2019, 09:10 PM cpavlenko
[quote name='cpavlenko' post='2752006' date='Oct ... Oct 3 2019, 09:44 PM cpavlenko
[quote name='cpavlenko' post='2752017' date='Oct ... Oct 3 2019, 09:48 PM MikeM Hello...I had the exact same issue with my Weber 4... Oct 4 2019, 09:15 AM cpavlenko Sorry for the multi post guys. Was doing uploads o... Oct 4 2019, 09:38 AM Superhawk996 All the fuel line routings look sensible.
The pl... Oct 4 2019, 11:22 AM cpavlenko Yeah, the gurgling I here must be heat related. Lo... Oct 4 2019, 12:32 PM yeahmag Stock intake gaskets (which are a spacer of sorts)... Oct 4 2019, 03:34 PM porschetub Have you tried adjusting the fuel pressure to say ... Oct 5 2019, 01:54 PM cpavlenko OK, if I put a phenolic spacer between manifold an... Oct 5 2019, 08:50 PM yeahmag Take the rain tray off. You are fixing the symptom... Oct 5 2019, 09:17 PM cpavlenko
Take the rain tray off. You are fixing the sympto... Oct 5 2019, 09:48 PM yeahmag The stock part will for the FI runners should do t... Oct 5 2019, 10:02 PM MikeM Triangle Auto Supply in Yakima, Washington.... Oct 6 2019, 08:05 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th April 2026 - 12:01 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.