 Rocker Arm Bolt Torque at TDC |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| amphiduck |
 Apr 17 2020, 10:34 PM
Post
#1
|
|
Member  Group: Members Posts: 94 Joined: 29-September 06 From: Tennessee Member No.: 6,947  |
I just replaced the pushrod tube seals on my '72 1.7 and wanted to verify that I torqued the rocker arms correctly. I torqued both 1 and 3 cylinders at TDC (rotor in distributor pointing at 12:00 on the notch) and #2 and 4 with roter at 3:00. Did I need to rotate the engine at all between 1&3 or 2&4? I torqued to 130 inch/pounds or almost 11 ft/lbs.
Thanks for the help, hope to adjust valves and replace valve cover gaskets tomorrow. |
   |
 
|
Posts in this topic
  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 5th July 2025 - 06:32 AM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.