 914 flywheel vs a bus flywheel, any differences? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| malcolm2 |
 Apr 26 2020, 07:43 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,749 Joined: 31-May 11 From: Nashville Member No.: 13,139 Region Association: South East States 
 |
I sure can’t see any.
Building a 2.0 from a 1.8 from a 914 for my 72 bus that came with a 1.7. Have both flywheels. I did not label either. The 914 was running when removed so it must be the shinier one. The bus sat in a field for 10 years. So much moisture under there that the magnesium bell housing deteriorated. Anyway, both are 210 mm. Some vendors say their 914 FW won’t work on a bus and visa-versa. Anyone have more details?    |
   |
 
|
  |
Replies
| porschetub |
Apr 26 2020, 02:07 PM
Post
#2
|
|
914 Guru Group: Members Posts: 5,064 Joined: 25-July 15 From: New Zealand Member No.: 18,995 Region Association: None |
They aren't the same,the bus flywheel has a different ring gear offset incase someone hasn't mentioned it already.
I've never checked but I think the pressure plate position is different also from one to the other. |
|
|
|
Posts in this topic
malcolm2 914 flywheel vs a bus flywheel Apr 26 2020, 07:43 AM
GregAmy One thing I see is that the one on the left does n... Apr 26 2020, 07:59 AM
malcolm2
One thing I see is that the one on the left does ... Apr 26 2020, 08:03 AM GregAmy doesn't the "step" come from the fac... Apr 26 2020, 08:07 AM rgalla9146 In the Porsche parts manual the part number is 02... Apr 26 2020, 08:02 AM malcolm2
In the Porsche parts manual the part number is 0... Apr 26 2020, 08:13 AM Bleyseng On a bus the pilot shaft bearing is in the cranksh... Apr 26 2020, 08:16 AM malcolm2 OK. That is what I see. With that difference in a... Apr 26 2020, 09:05 AM Krieger My car had a 228mm flywheel when I bought it. Idk ... Apr 26 2020, 09:22 AM Mark Henry Bus came with a 210, 215 and the 228mm.
I know for... Apr 26 2020, 09:42 AM Krieger
Bus came with a 210, 215 and the 228mm.
I know fo... Apr 26 2020, 09:52 AM malcolm2
Bus came with a 210, 215 and the 228mm.
I know fo... Apr 26 2020, 10:57 AM Bleyseng That 2.0l crank is shot but it does show you the 9... Apr 26 2020, 10:27 AM Bleyseng You have to install a 091 bell housing on it. The ... Apr 26 2020, 11:26 AM malcolm2 http://www.type2.com/
Flywheel section has some ... Apr 26 2020, 06:17 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd April 2026 - 11:18 AM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.