 Painting engine bay ahead of exterior repaint |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Tdskip |
 May 14 2020, 07:54 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 3,736 Joined: 1-December 17 From: soCal Member No.: 21,666 Region Association: None 
 |
Good morning, hope it has been a good week so far.
I am going to be dropping the engine on the AZ car (one with the oil blow by) soon and will be finishing repairing all of the prior owner AC line holes with new metal etc. I will also be repairing some minor rust on the batter tray (fortunately then tray “frame” and support are in good shape. This strikes me as the right time to reapray the engine bay, and was wondering if others have done this and any tips or best practices they have to share. Obviously same paint color as exterior and same paint family/sourcing as will be used on exterior, but any prep and other tips? Thanks in advance for the ideas. |
   |
 
|
  |
Replies
| kroelofsen |
May 14 2020, 09:10 AM
Post
#2
|
|
Member Group: Members Posts: 101 Joined: 27-June 19 From: The Netherlands Member No.: 23,255 Region Association: Europe
|
Hi, I'm in the same process right now... Lots of corners etc to work on. Also lots will be covered by equipment in the engine bay. Because I had to do welding on hell hole and jack points I stripped most of the engine bay.
   Hope this helps... I covered the wiring loom / snorkel with plastic and wrap it with tape to keep it out of the way... PS Battery tray not yet in... And before spaying I will remove the rear window... |
|
|
|
Posts in this topic
Tdskip Painting engine bay ahead of exterior repaint May 14 2020, 07:54 AM
Larmo63 It's a thankless and tedious job because of th... May 14 2020, 08:09 AM
BeatNavy
It's a thankless and tedious job because of t... May 14 2020, 08:19 AM sreyemj I just did this. Ended up removing everything and ... May 14 2020, 09:00 AM Tdskip
I just did this. Ended up removing everything and... May 14 2020, 09:06 AM Tdskip Thanks @kroelofsen , you are doing nice work the... May 14 2020, 09:19 AM dakotaewing I have done this as well.
Go to HF and buy about 3... May 14 2020, 09:31 AM ValcoOscar
I have done this as well.
Go to HF and buy about ... May 14 2020, 10:07 AM Tdskip Wow! May 14 2020, 10:06 AM Cairo94507 The end result is directly proportionate to the am... May 14 2020, 10:09 AM ndfrigi Hi Tom, I’m also in the process of prioritizing ... May 14 2020, 12:08 PM Tdskip Thanks again for all of the responses.
I talked ... May 14 2020, 12:10 PM Superhawk996 FYI -- if you media blast that BEWARE. Holes in t... May 14 2020, 01:29 PM mepstein I would try to find a teenager that wants to work,... May 14 2020, 01:57 PM Jamie Removing the original glue that secured the firewa... May 14 2020, 01:58 PM Cairo94507 I can tell you from experience that when my chassi... May 14 2020, 03:13 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th May 2025 - 05:59 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.