 Rear Brake bleeding question |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Frankvw |
 May 21 2020, 10:09 AM
Post
#1
|
|
working on my first 914 !  Group: Members Posts: 651 Joined: 13-April 16 From: Holland, the Netherlands Member No.: 19,896 Region Association: Europe  |
Hi all, I replaced the calipers and pads and flex hoses in the rear. (1973 1,7)
Old brake fluid from reservoir removed with siringe and filled with new fluid. I did set the clearance on the inner and outer on both sides. Then I did bleed the brakes and checked the clearance again (was still OK) Now the proportioning valve part....do I need someone to push the pedal to the floor, keep pedal at floor and then I bleed again while pedal is down? Or does it work another way ? Or is it not needed after what I already did ? Thanks for your reply ! |
   |
 
|
  |
Replies
| Frankvw |
May 22 2020, 01:22 AM
Post
#2
|
|
working on my first 914 ! Group: Members Posts: 651 Joined: 13-April 16 From: Holland, the Netherlands Member No.: 19,896 Region Association: Europe |
"I'm probably wrong but I thought I read somewhere on here that suction doesnt work well on the back brakes because of the pressure valve....any truth to this?"
Well...because of that valve (proportioning) I did ask if any next/extra step was needed. I was not sure since it is an 'odd' device compared to the setup in my Volkswagens and although I did search for info, I was not sure if I had to take extra steps. |
|
|
|
Posts in this topic
Frankvw Rear Brake bleeding question May 21 2020, 10:09 AM
davep Do you have a proper solid pedal feel? If you circ... May 21 2020, 10:49 AM Frankvw well...thanks for the reply ! But it is still ... May 21 2020, 10:54 AM IronHillRestorations Here's how I bleed a 914 brake system, from my... May 21 2020, 12:46 PM cuddy_k :agree: The pressure system is great. I use the Mo... May 21 2020, 01:07 PM 914Toy I use a similar system as the post above, but use ... May 21 2020, 01:18 PM twistedstang Pressure bleed with a homemade setup or a Gunson e... May 21 2020, 01:54 PM Frankvw thanks all for the replies. System did not run dry... May 21 2020, 02:32 PM twistedstang I'm probably wrong but I thought I read somewh... May 21 2020, 03:00 PM
IronHillRestorations One problem with vacuum bleeding is you pull air a... May 22 2020, 07:57 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 2nd June 2024 - 05:08 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.