1975 Possible Stop Plate Issue, Potential Shifting Issue Options

[ballsyfacts914]

Hi All,

Hope everyone is staying safe!

I recently had an issue where my shifting rod came apart while driving, luckily it was at a stop light and I was able to get out of traffic easily and safely. However, this required a tow and a trip to the mechanic....obviously.

Before this, my shifting had always been a little troublesome so I had gotten into the habit of being very mindful of my shifting, not shifting too fast or abruptly. After getting the car back from the mechanic, the shifting was the best it had ever been, however, I noticed the function of the stop plate was nowhere near what it had previously been (non-existent as if it wasn't a part of the shift assembly). This wasn't a big concern to me though as the shifting was near perfect, the only real issue was I would nick reverse from time to time going from first to second.

Before this, I had been looking for a more experienced 914 mechanic and when I did take the car into the new mechanic he mentioned the shifting was not like a 914. At the time I didn't want any adjustments made but now I am starting to think I should. As mentioned, the stop plate is there but there is no obvious feel of it being there. In fact, even when I really pull the shifter to the left there is barely any give as one would expect. Other than nicking reverse on occasion the car shifts beautifully.

Any suggestions on what the issue may be? I haven't taken anything apart yet but based on my previous experience and how it current appears, I see no issues.

Thanks

[914 Ranch]

Ture the plate over. I have been through this before and I had the plate upside down. But I'm 72 and my brain thinks it's OK. Who am I to say...

[ballsyfacts914]

Ture the plate over. I have been through this before and I had the plate upside down. But I'm 72 and my brain thinks it's OK. Who am I to say...

Thanks for the tip! I have checked and the plate is most definitely in correctly.