 Brake bleeding, Nothing but air from rear brakes |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Medtner3 |
 Oct 4 2020, 07:49 AM
Post
#1
|
|
Member  Group: Members Posts: 187 Joined: 7-July 20 From: Cedar Park Member No.: 24,467 Region Association: None  |
Just rebuilt my rear calipers with seals from PMB Performance. Using a vacuum brake bleeder I started with the right rear caliper lower bleeder screw ( I have two screws) and initially pulled about an inch of brake fluid with lots of bubbles and then zip. I get zero brake fluid now.
What could cause this? I have no signs of any leaks and the brakes were not bad before I rebuilt the calipers. I read somewhere that I might need to bleed the proportioning valve or even pump into the caliper some brake fluid through the top bleeder ? I ordered a Motive pressure bleeder which arrives in a few days Attached image(s)   
|
   |
 
|
  |
Replies
| mlindner |
Oct 4 2020, 08:36 AM
Post
#2
|
|
Senior Member Group: Members Posts: 1,691 Joined: 11-November 11 From: Merrimac, WI Member No.: 13,770 Region Association: Upper MidWest 
|
Yes I would try the fronts first...I know that is not the correct way, but just to get fluid coming out. I did not have a pressure bleeder so I just carefully covered everything up around the reservoir, wrapped a rag around the top of it and shot some air in (air compressor) while my buddy pumped the brake peddle.
|
|
|
|
Posts in this topic
Medtner3 Brake bleeding Oct 4 2020, 07:49 AM
mlindner Chances are the brake fluid drained out of the mas... Oct 4 2020, 08:06 AM
Medtner3
Chances are the brake fluid drained out of the ma... Oct 4 2020, 08:25 AM Medtner3
Yes I would try the fronts first...I know that is... Oct 4 2020, 08:42 AM davep On a caliper with two bleed nipples, the top is th... Oct 4 2020, 08:55 AM Medtner3
On a caliper with two bleed nipples, the top is t... Oct 4 2020, 11:51 AM iankarr
On a caliper with two bleed nipples, the top is ... Oct 4 2020, 12:08 PM Medtner3
[quote name='Medtner3' post='2856582' date='Oct 4... Oct 4 2020, 01:42 PM Medtner3
[quote name='Medtner3' post='2856582' date='Oct 4... Oct 6 2020, 04:28 PM Olympic 914
It only pressurizes to 5-6 psi I wonder if tha... Oct 6 2020, 06:42 PM Medtner3
It only pressurizes to 5-6 psi I wonder if th... Oct 6 2020, 06:47 PM iankarr
[quote name='Olympic 914' post='2857140' date='Oc... Oct 6 2020, 07:59 PM Tdskip The other thing that I would add is that for whate... Oct 4 2020, 10:55 AM iankarr I like to use pressure (motive @ 5-10 psi) followe... Oct 4 2020, 11:12 AM rhodyguy Get some speed bleeders. One for each caliper. Ins... Oct 4 2020, 12:05 PM Gint Get some speed bleeders. One for each caliper. Ins... Oct 6 2020, 04:45 PM Amphicar770 I had no luck vacuum bleeding the 914, couldn... Oct 6 2020, 05:19 PM Medtner3
I had no luck vacuum bleeding the 914, couldn... Oct 6 2020, 06:49 PM rjames I could never get the brakes bled properly until I... Oct 7 2020, 11:07 AM Medtner3
I could never get the brakes bled properly until ... Oct 9 2020, 05:17 PM draganc Assuming you are not in a rush to drive the car I ... Oct 8 2020, 05:38 PM Medtner3 Damaged master cylinder or impatient? I put on spe... Oct 8 2020, 07:13 PM davep Have you correctly set the venting clearance on th... Oct 8 2020, 08:09 PM Medtner3
Have you correctly set the venting clearance on t... Oct 9 2020, 07:27 AM Gint Have you correctly set the venting clearance on th... Oct 10 2020, 09:55 AM Medtner3
[quote name='Medtner3' post='2857647' date='Oct 9... Oct 11 2020, 08:30 PM Medtner3 UPDATE: Pedal bled four times have a pedal now it... Oct 9 2020, 05:19 PM Frankvw I understans it is very frustrating yes. Keep up t... Oct 10 2020, 06:44 AM davep http://www.914world.com/bbs2/index.php?showtopic=3... Oct 10 2020, 09:27 PM mb911 Kind of have the same issue.. The entire brake sys... Oct 11 2020, 06:36 AM iankarr
Kind of have the same issue.. The entire brake sy... Oct 11 2020, 07:08 AM mb911
Kind of have the same issue.. The entire brake s... Oct 11 2020, 07:10 AM Medtner3
[quote name='iankarr' post='2858075' date='Oct 11... Oct 11 2020, 08:31 PM Medtner3
[quote name='iankarr' post='2858075' date='Oct 1... Oct 11 2020, 08:33 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st August 2025 - 02:11 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.