 901 Transmission synchro help, Large brake band gap |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Driver174 |
 Feb 17 2021, 11:22 PM
Post
#1
|
|
Member  Group: Members Posts: 120 Joined: 2-February 17 From: Nevada Member No.: 20,806 Region Association: None 
 |
I'm building up a core transmission with custom gear ratios. Most of the core trans pieces look really good, but I'm questioning the synchro assemblies; don't remember this large of a gap between brake bands and thrust blocks on previous transmissions.
Could this much gap be normal? It looks to be 1/8 - 5/32" gap on each brake band. Thanks, Jim  |
   |
 
|
  |
Replies
| oldie914 |
Feb 19 2021, 09:01 AM
Post
#2
|
|
Member Group: Members Posts: 114 Joined: 2-May 10 From: Germany Member No.: 11,680 Region Association: None |
As far as I know, there are two versions of the 901/914 syncro blocks and bands. The earlier 901 version used longer bands and a shorter fixed block. The later version was used on the 914 and as far as I know on the 1970/71 911 transmission and 3rd through 5th gears on the 915 transmission.
The attached pictures show a 914 gear syncro on the left and a 901 syncro on the right. The approximate measurements for the short and long bands are also shown. That said, it looks like you have too much clearance between your bands and the blocks. There should be no clearance when you push the bands against the central ring..     [attachmentid=781732] Attached image(s) 
|
|
|
|
Posts in this topic
Driver174 901 Transmission synchro help Feb 17 2021, 11:22 PM
brant There are different length of blocks and stops for... Feb 18 2021, 09:29 AM
gtbarnes
I'm building up a core transmission with cust... Jun 13 2025, 08:37 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th July 2025 - 09:00 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.