 Recommendation for in-line fuel pressure gauge |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| rjames |
 May 3 2021, 09:48 AM
Post
#1
|
|
I'm made of metal  Group: Members Posts: 3,955 Joined: 24-July 05 From: Shoreline, WA Member No.: 4,467 Region Association: Pacific Northwest 
 |
Anyone have a recommendation for a fuel pressure gauge that I can install in the engine compartment and leave there for a while? I don't need anything fancy. Just need something that will do the job and not leak and cause a fire hazard.
|
   |
 
|
  |
Replies
| ndfrigi |
May 3 2021, 10:43 AM
Post
#2
|
|
Advanced Member Group: Members Posts: 2,933 Joined: 21-August 11 From: Orange County Member No.: 13,474 Region Association: Southern California
|
Hope this will help. Also depends if you have FI (28 to 31 psi) or Carb (2.5 to 3.5 psi). For FI you can get the 0-100 Psi and for carb maybe the 0-15 Psi.
   |
|
|
|
Posts in this topic
rjames Recommendation for in-line fuel pressure gauge May 3 2021, 09:48 AM
gereed75
Anyone have a recommendation for a fuel pressure ... May 3 2021, 10:00 AM
rjames
Anyone have a recommendation for a fuel pressure... May 3 2021, 10:40 AM GregAmy Still using D-Jet? Get one with a 5/16" fuel ... May 3 2021, 10:18 AM rjames
Still using D-Jet? Get one with a 5/16" fuel... May 3 2021, 10:38 AM gereed75 same as above
https://www.summitracing.com/parts... May 3 2021, 10:46 AM 930cabman @ ndfrigi: where can I locate the barbed fitting w... May 3 2021, 01:31 PM ndfrigi
@ ndfrigi: where can I locate the barbed fitting ... May 3 2021, 03:24 PM rjames Thanks everyone. Just put in an order to Summit. May 3 2021, 03:15 PM Ansbacher Many fuel pressure gauges when mounted inside the ... May 3 2021, 03:49 PM burton73 Where and what PMB used in number 41 my 6 USG b... May 3 2021, 04:28 PM 930cabman
Where and what PMB used in number 41 my 6 USG ... May 3 2021, 04:47 PM Krieger
Where and what PMB used in number 41 my 6 USG... May 3 2021, 05:40 PM roblav1 I've used the PMO version in a couple cars. May 3 2021, 05:43 PM 930cabman Does anyone make a gauge/pressure regulator combo ... May 3 2021, 05:51 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 9th June 2024 - 11:00 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.