Rear Sway bar install, Trying to figure out how everything goes together Options

[roundtwo]

Trying to get prepped for all my welding needs. Id like to Pre-fit the rear sway bar so I can determine exactly we’re to mount the bushing mount backing plates. I want to be sure they’re perpendicular to the sway bar in just the right spot
1. See first pick. Do I install the bushings in the drop links first and then install the ball ends? Or, do I install the ball cups on the balls and then have them pressed into the drop links? Any tips on how to get these hard bushings into the drop links?

2. Do I simply replace the new shock base metal rod labeled #1 with #2. See second pic

I’ve read the rear sway bar mounts instructions on the Pelican Parts web site. Very helpful- He just doesn’t cover the actual sway bar assembly. Bar is 16mm. Installing on a 1970.

Many thanks.

[ClayPerrine]

The big bolt with the ball end replaces the lower shock mount bolt.
The drop links need the bushings inserted with one facing each way.

The bushings fit over the bar and the bar bolts to the sway bar plates under the back end. If the car didn't come from the factory with a sway bar, then the plates won't be there and have to be welded onto the chassis.

https://914rubber.com/914ltd-early-rear-swa...unt-bracket-set

(IMG:http://www.914world.com/bbs2/uploads_offsite/cdna3.zoeysite.com-1143-1623632826.1.jpg)


Not my car....
(IMG:http://www.914world.com/bbs2/uploads/post-10825-1563835013.jpg)

Check and see if you have the brackets. If not, just order a pair and get them welded on.

Clay