LED people, how would you do this? Options

[tazz9924]

As i scroll down social media sights, i see renderings like the one below and im curious how you would go about accomplishing this tail light design? Im new to led stuff but would you use a strip light to follow the contour, or build a housing and wire them in? How do you set it up to do things like half flash for turn signals and run dim for running lights etc. Anyone with some knowledge would be appreciated. Id like to learn how to do something like this.

[mgarrison]

I used these to add turn signals to my sport bike:
https://www.customdynamics.com/truflex-ii

Not sure how long you can get them, but know they have options for brake vs. turn, as well as tubing color. They were nice and bright on the bike.

[bbrock]

I used these to add turn signals to my sport bike:
https://www.customdynamics.com/truflex-ii

Not sure how long you can get them, but know they have options for brake vs. turn, as well as tubing color. They were nice and bright on the bike.

I have three of those on my car to add some stealth safety. One for a third brake light which also functions as a high tail light, and two tucked behind the front bumper to provide side marker lighting after a side wart delete. They are almost invisible when the lights are off, but can't be ignored when they are lit up.