 Optimal front sway for a 1.7 ? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Literati914 |
 Feb 11 2022, 12:03 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,046 Joined: 16-November 06 From: Dallas, TX Member No.: 7,222 Region Association: Southwest Region  |
I believe, if I’m not mistaken, there was a 13mm front sway bar for the 912 cars.. and I was wondering if that wouldn’t be more appropriate for a 1.7L 914 rather than the stock oem 15mm. I’m not sure if anyone bothers with a ARB on a 1.7L, but the 13mm ones are fairly easy to come by, cause everyone upgrades to bigger. So that’s a plus. Thoughts?
. |
   |
 
|
  |
Replies
| Literati914 |
Feb 11 2022, 02:47 PM
Post
#2
|
|
Advanced Member Group: Members Posts: 2,046 Joined: 16-November 06 From: Dallas, TX Member No.: 7,222 Region Association: Southwest Region |
Wow, always a wealth of knowledge offered up so enthusiastically here on the world .. thanks for the education (everyone), I appreciate it! (IMG:style_emoticons/default/beerchug.gif)
Anyone know if 1.7L cars ever came with sways at all, from the factory? I doubt it, but would like to know for sure… . |
|
|
|
Posts in this topic
Literati914 Optimal front sway for a 1.7 ? Feb 11 2022, 12:03 AM
wonkipop
I believe, if I’m not mistaken, there was a 13... Feb 11 2022, 12:37 AM 914Sixer Factory set it up for the best possible all round ... Feb 11 2022, 06:59 AM mepstein The 13mm will be a lot better than no bar. Feb 11 2022, 07:01 AM
Superhawk996
The 13mm will be a lot better than no bar.
To t... Feb 11 2022, 07:15 AM Superhawk996 Anti roll bar size has nothing to do with engine s... Feb 11 2022, 07:02 AM 914werke Ive done at least one 13mm Front/No Rear update wi... Feb 11 2022, 09:23 AM mepstein
Ive done at least one 13mm Front/ No Rear update ... Feb 11 2022, 10:22 AM Superhawk996
Ive done at least one 13mm Front/ No Rear update... Feb 11 2022, 11:31 AM Superhawk996 I'm going to :stir: just a little more.
The... Feb 11 2022, 11:17 AM Literati914
Anti roll bar size has nothing to do with engine ... Feb 11 2022, 12:06 PM Superhawk996
... my mind a smaller bar would be more appropr... Feb 11 2022, 01:17 PM wonkipop
[quote name='Superhawk996' post='2981037' date='F... Feb 11 2022, 06:16 PM Superhawk996
note - they appeared to have the slightly stiffe... Feb 11 2022, 06:37 PM wonkipop
note - they appeared to have the slightly stiff... Feb 11 2022, 08:17 PM 914_teener
[quote name='Superhawk996' post='2981153' date='F... Feb 11 2022, 08:57 PM mepstein My 912 came with just the 13mm front bar. The 912/... Feb 11 2022, 01:28 PM mepstein
Wow, always a wealth of knowledge offered up so e... Feb 11 2022, 02:58 PM emerygt350 Having a little roll and compression is a good thi... Feb 11 2022, 05:29 PM horizontally-opposed Great discussion, and I've long wondered about... Feb 11 2022, 05:59 PM Superhawk996
I followed that recipe . . .
The only real p... Feb 11 2022, 06:31 PM horizontally-opposed
[quote name='horizontally-opposed' post='298... Feb 12 2022, 03:18 PM Literati914
..
to clarify - far as i know its 15 front and 16... Feb 11 2022, 06:39 PM Superhawk996
And just a side note, while we’re on the subje... Feb 11 2022, 07:17 PM wonkipop
..
to clarify - far as i know its 15 front and 1... Feb 11 2022, 08:19 PM Literati914
.., that car drove like it was on rails......forg... Feb 11 2022, 09:46 PM flyer86d We ran a 19mm front with a 16mm rear on our 71 1.7... Feb 12 2022, 02:13 PM jkb081 I do not feel it is a fair comparison between a 91... Feb 12 2022, 05:24 PM roblav1
I do not feel it is a fair comparison between a 9... Feb 12 2022, 05:48 PM roblav1 Pete, adding LSD will make the car push coming out... Feb 12 2022, 05:40 PM horizontally-opposed
Pete, adding LSD will make the car push coming ou... Feb 12 2022, 06:32 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 1st August 2025 - 03:46 PM |
Invision Power Board
v9.1.4 © 2025 IPS, Inc.